lfs-book-zh_CN/chapter05/toolchaintechnotes.xml

<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
  <!ENTITY % general-entities SYSTEM "../general.ent">
  %general-entities;
]>
<sect1 id="ch-tools-toolchaintechnotes">
<title>Toolchain technical notes</title>
<?dbhtml filename="toolchaintechnotes.html"?>

<para>This section attempts to explain some of the rationale and technical
details behind the overall build method. It's not essential that you understand
everything here immediately. Most of it will make sense once you have performed
an actual build. Feel free to refer back here at any time.</para>

<para>The overall goal of <xref linkend="chapter-temporary-tools"/> is to provide a sane,
temporary environment that we can chroot into, and from which we can produce a
clean, trouble-free build of the target LFS system in
<xref linkend="chapter-building-system"/>. Along the way, we attempt to divorce ourselves
from the host system as much as possible, and in so doing build a
self-contained and self-hosted toolchain. It should be noted that the
build process has been designed to minimize the risks for
new readers and provide maximum educational value at the same time. In other
words, more advanced techniques could be used to build the system.</para>

<important>
<para>Before continuing, you really should be aware of the name of your working
platform, often also referred to as the <emphasis>target triplet</emphasis>. For
many folks the target triplet will probably be
<emphasis>i686-pc-linux-gnu</emphasis>. A simple way to determine your target
triplet is to run the <command>config.guess</command> script that comes with
the source for many packages. Unpack the Binutils sources and run the script:
<userinput>./config.guess</userinput> and note the output.</para>

<para>You'll also need to be aware of the name of your platform's
<emphasis>dynamic linker</emphasis>, often also referred to as the
<emphasis>dynamic loader</emphasis>, not to be confused with the standard linker
<command>ld</command> that is part of Binutils. The dynamic linker is provided
by Glibc and has the job of finding and loading the shared libraries needed by a
program, preparing the program to run and then running it. For most folks the
name of the dynamic linker will be <filename>ld-linux.so.2</filename>. On
platforms that are less prevalent, the name might be
<filename>ld.so.1</filename> and newer 64 bit platforms might even have
something completely different. You should be able to determine the name
of your platform's dynamic linker by looking in the
<filename class="directory">/lib</filename> directory on your host system. A
sure-fire way is to inspect a random binary from your host system by running:
<userinput>readelf -l &lt;name of binary&gt; | grep interpreter</userinput>
and noting the output. The authoritative reference covering all platforms is in
the <filename>shlib-versions</filename> file in the root of the Glibc source
tree.</para>
</important>

<para>Some key technical points of how the <xref linkend="chapter-temporary-tools"/> build
method works:</para>

<itemizedlist>
<listitem><para>Similar in principle to cross compiling whereby tools installed
into the same prefix work in cooperation and thus utilize a little GNU
<quote>magic</quote>.</para></listitem>

<listitem><para>Careful manipulation of the standard linker's library search
path to ensure programs are linked only against libraries we
choose.</para></listitem>

<listitem><para>Careful manipulation of <command>gcc</command>'s
<filename>specs</filename> file to tell the compiler which target dynamic
linker will be used.</para></listitem>
</itemizedlist>

<para>Binutils is installed first because the <command>./configure</command> runs of both GCC and Glibc perform various
feature tests on the assembler and linker
to determine which software features to enable
or disable. This is more important than one might first realize. An incorrectly
configured GCC or Glibc can result in a subtly broken toolchain where the impact
of such breakage might not show up until near the end of the build of a whole
distribution. Thankfully, a test suite failure will usually alert us before too
much time is wasted.</para>

<para>Binutils installs its assembler and linker into two locations,
<filename class="directory">/tools/bin</filename> and
<filename class="directory">/tools/$TARGET_TRIPLET/bin</filename>. In reality,
the tools in one location are hard linked to the other. An important facet of
the linker is its library search order. Detailed information can be obtained
from <command>ld</command> by passing it the <parameter>--verbose</parameter>
flag. For example: <command>ld --verbose | grep SEARCH</command> will
show you the current search paths and their order. You can see what files are
actually linked by <command>ld</command> by compiling a dummy program and
passing the <parameter>--verbose</parameter> switch to the linker. For example:
<userinput>gcc dummy.c -Wl,--verbose 2&gt;&amp;1 | grep succeeded</userinput>
will show you all the files successfully opened during the linking.</para>

<para>The next package installed is GCC and during its run of
<command>./configure</command> you'll see, for example:</para>

<blockquote><screen><computeroutput>checking what assembler to use... /tools/i686-pc-linux-gnu/bin/as
checking what linker to use... /tools/i686-pc-linux-gnu/bin/ld</computeroutput></screen></blockquote>

<para>This is important for the reasons mentioned above. It also demonstrates
that GCC's configure script does not search the PATH directories to find which
tools to use. However, during the actual operation of <command>gcc</command>
itself, the same search paths are not necessarily used. You can find out which
standard linker <command>gcc</command> will use by running:
<userinput>gcc -print-prog-name=ld</userinput>.
Detailed information can be obtained from <command>gcc</command> by passing
it the <parameter>-v</parameter> flag while compiling a dummy program. For
example: <userinput>gcc -v dummy.c</userinput> will show you detailed
information about the preprocessor, compilation and assembly stages, including
<command>gcc</command>'s include search paths and their order.</para>
 
<para>The next package installed is Glibc. The most important considerations for
building Glibc are the compiler, binary tools and kernel headers. The compiler
is generally no problem as Glibc will always use the <command>gcc</command>
found in a PATH directory. The binary tools and kernel headers can be a little
more troublesome. Therefore we take no risks and use the available configure
switches to enforce the correct selections. After the run of
<command>./configure</command> you can check the contents of the
<filename>config.make</filename> file in the
<filename class="directory">glibc-build</filename> directory for all the
important details. You'll note some interesting items like the use of
<parameter>CC="gcc -B/tools/bin/"</parameter> to control which binary tools are
used, and also the use of the <parameter>-nostdinc</parameter> and
<parameter>-isystem</parameter> flags to control the compiler's include search
path. These items help to highlight an important aspect of the Glibc package:
it is very self-sufficient in terms of its build machinery and generally does
not rely on toolchain defaults.</para>

<para>After the Glibc installation, we make some adjustments to ensure that
searching and linking take place only within our <filename class="directory">/tools</filename>
prefix. We install an adjusted <command>ld</command>, which has a hard-wired
search path limited to <filename class="directory">/tools/lib</filename>. Then
we amend <command>gcc</command>'s specs file to point to our new dynamic
linker in <filename class="directory">/tools/lib</filename>. This last step is
<emphasis>vital</emphasis> to the whole process. As mentioned above, a
hard-wired path to a dynamic linker is embedded into every ELF shared
executable. You can inspect this by running:
<userinput>readelf -l &lt;name of binary&gt; | grep interpreter</userinput>.
By amending <command>gcc</command>'s specs file, we are ensuring that every
program compiled from here through the end of this chapter will use our new
dynamic linker in <filename class="directory">/tools/lib</filename>.</para>

<para>The need to use the new dynamic linker is also the reason why we apply the
Specs patch for the second pass of GCC. Failure to do so will result in the GCC
programs themselves having the name of the dynamic linker from the host system's
<filename class="directory">/lib</filename> directory embedded into them, which
would defeat our goal of getting away from the host.</para>

<para>During the second pass of Binutils, we are able to utilize the
<parameter>--with-lib-path</parameter> configure switch to control
<command>ld</command>'s library search path. From this point onwards, the
core toolchain is self-contained and self-hosted. The remainder of the
<xref linkend="chapter-temporary-tools"/> packages all build against the new Glibc in
<filename class="directory">/tools</filename> and all is well.</para>

<para>Upon entering the chroot environment in <xref linkend="chapter-building-system"/>, the
first major package we install is Glibc, due to its self-sufficient nature that
we mentioned above. Once this Glibc is installed into
<filename class="directory">/usr</filename>, we perform a quick changeover of
the toolchain defaults, then proceed for real in building the rest of the
target LFS system.</para>

<sect2>
<title>Notes on static linking</title>

<para>Most programs have to perform, beside their specific task, many rather
common and sometimes trivial operations. These include allocating memory,
searching directories, reading and writing files, string handling, pattern
matching, arithmetic and many other tasks. Instead of obliging each program to
reinvent the wheel, the GNU system provides all these basic functions in
ready-made libraries. The major library on any Linux system is
<emphasis>Glibc</emphasis>.</para>

<para>There are two primary ways of linking the functions from a library to a
program that uses them: statically or dynamically. When a program is linked
statically, the code of the used functions is included in the executable,
resulting in a rather bulky program. When a program is dynamically linked, what
is included is a reference to the dynamic linker, the name of the library, and
the name of the function, resulting in a much smaller executable. (A third way
is to use the programming interface of the dynamic linker. See the
<emphasis>dlopen</emphasis> man page for more information.)</para>

<para>Dynamic linking is the default on Linux and has three major advantages
over static linking. First, you need only one copy of the executable library
code on your hard disk, instead of having many copies of the same code included
into a whole bunch of programs -- thus saving disk space. Second, when several
programs use the same library function at the same time, only one copy of the
function's code is required in core -- thus saving memory space. Third, when a
library function gets a bug fixed or is otherwise improved, you only need to
recompile this one library, instead of having to recompile all the programs that
make use of the improved function.</para>

<para>If dynamic linking has several advantages, why then do we statically link
the first two packages in this chapter? The reasons are threefold: historical,
educational, and technical. Historical, because earlier versions of LFS
statically linked every program in this chapter. Educational, because knowing
the difference is useful. Technical, because we gain an element of independence
from the host in doing so, meaning that those programs can be used
independently of the host system. However, it's worth noting that an overall
successful LFS build can still be achieved when the first two packages are
built dynamically.</para>

</sect2>

</sect1>