lfs-book/appendices/dependencies.xml

<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE appendix PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
  "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
  <!ENTITY % general-entities SYSTEM "../general.ent">
  %general-entities;
]>

<appendix id="appendixc" xreflabel="Appendix C">
  <?dbhtml dir="appendices"?>
  <?dbhtml filename="dependencies.html"?>

  <title>Dependencies</title>

  <para>Every package built in LFS relies on one or more other packages in
  order to build and install properly. Some packages even participate in
  circular dependencies, that is, the first package depends on the second which
  in turn depends on the first. Because of these dependencies, the order in
  which packages are built in LFS is very important. The purpose of this page
  is to document the dependencies of each package built in LFS.</para>

  <para>For each package we build, we have listed three, and sometimes four,
  types of dependencies.  The first lists what other packages need to be
  available in order to compile and install the package in question. The second
  lists what packages, in addition to those on the first list, need to be
  available in order to run the test suites. The third list of dependencies are
  packages that require this package to be built and installed in its final
  location before they are built and installed. In most cases, this is because
  these packages will hard code paths to binaries within their scripts. If not
  built in a certain order, this could result in paths of /tools/bin/[binary]
  being placed inside scripts installed to the final system. This is obviously
  not desirable.</para>

  <para>The last list of dependencies are optional packages that are not
  addressed in LFS, but could be useful to the user.  These packages may have
  additional mandatory or optional dependencies of their own.  For these
  dependencies, the recommended practice is to install them after completion of
  the LFS book and then go back and rebuild the LFS package.  In several cases,
  re-installation is addressed in BLFS.</para>

<!-- Begin Acl dependency info -->
  <bridgehead renderas="sect2" id="acl-dep">Acl</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
          <seg>Attr, Bash, Binutils, Coreutils, GCC, Gettext, Grep, M4, Make,
          Perl, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>Automake, Diffutils, Findutils, and Libtool</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>Coreutils, Sed, Tar, and Vim</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Attr dependency info -->
  <bridgehead renderas="sect2" id="attr-dep">Attr</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
          <seg>Bash, Binutils, Coreutils, GCC, Gettext, Grep, M4, Make,
          Perl, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>Automake, Diffutils, Findutils, and Libtool</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>Acl and Libcap</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Autoconf dependency info -->
  <bridgehead renderas="sect2" id="autoconf-dep">Autoconf</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
          <seg>Bash, Coreutils, Grep, M4, Make, Perl, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>Automake, Diffutils, Findutils, GCC, and Libtool</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>Automake</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>Emacs</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Automake dependency info -->
  <bridgehead renderas="sect2" id="automake-dep">Automake</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
          <seg>Autoconf, Bash, Coreutils, Gettext, Grep, M4, Make, Perl,
          Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>Binutils, Bison, Bzip2, DejaGNU, Diffutils, Expect, Findutils,
          Flex, GCC, Gettext, Gzip, Libtool, and Tar</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Bash dependency info -->
  <bridgehead renderas="sect2" id="bash-dep">Bash</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
          <seg>Bash, Binutils, Bison, Coreutils, Diffutils, Gawk, GCC, Glibc,
          Grep, Make, Ncurses, Patch, Readline, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>Shadow</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>Xorg</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Bc dependency info -->
  <bridgehead renderas="sect2" id="bc-dep">Bc</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
          <seg>Bash, Binutils, Coreutils, GCC, Glibc,
          Grep, and Make</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>Gawk</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>Linux Kernel</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Binutils dependency info -->
  <bridgehead renderas="sect2" id="binutils-dep">Binutils</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, Diffutils, File, Flex, Gawk, GCC, Glibc,
         Grep, Make, Perl, Sed, Texinfo and Zlib</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>DejaGNU and Expect</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>Debuginfod</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Bison dependency info -->
  <bridgehead renderas="sect2" id="bison-dep">Bison</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, GCC, Gettext, Glibc,
         Grep, M4, Make, Perl, and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>Diffutils, Findutils, and Flex</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>Kbd and Tar</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>Doxygen (test suite)</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Bzip2 dependency info -->
  <bridgehead renderas="sect2" id="bzip2-dep">Bzip2</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, Diffutils, GCC, Glibc, Make,
         and Patch</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>File</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Check dependency info -->
  <bridgehead renderas="sect2" id="check-dep">Check</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>GCC, Grep, Make, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Coreutils dependency info -->
  <bridgehead renderas="sect2" id="coreutils-dep">Coreutils</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, GCC, Gettext, Glibc, GMP, Grep, Libcap,
         Make, Patch, Perl, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>Diffutils, E2fsprogs, Findutils, Shadow, and Util-linux</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>Bash, Diffutils, Eudev, Findutils, and Man-DB</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>Perl Expect and IO:Tty modules (for test suite)</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin D-Bus dependency info -->
<!--
  <bridgehead renderas="sect2" id="dbus-dep">D-Bus</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, Diffutils, Gawk, GCC, Glibc, Grep,
         Make, Sed, and Util-linux</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>Xorg Libs</seg>
        </seglistitem>
      </segmentedlist>
-->
<!-- Begin DejaGNU dependency info -->
  <bridgehead renderas="sect2" id="dejagnu-dep">DejaGNU</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Coreutils, Diffutils, GCC, Grep, Make, and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Diffutils dependency info -->
  <bridgehead renderas="sect2" id="diffutils-dep">Diffutils</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
          <seg>Bash, Binutils, Coreutils, Gawk, GCC, Gettext, Glibc, Grep,
          Make, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>Perl</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin E2fsprogs dependency info -->
  <bridgehead renderas="sect2" id="e2fsprogs-dep">E2fsprogs</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, Diffutils, Gawk, GCC, Glibc, Grep,
         Gzip, Make, Sed, Texinfo, and Util-linux</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>Procps-ng and Psmisc</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Eudev dependency info -->
  <bridgehead renderas="sect2" id="eudev-dep">Eudev</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, Gawk, GCC, Glibc, Grep, Gperf,
         Make, Sed, and Util-linux</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Expat dependency info -->
  <bridgehead renderas="sect2" id="expat-dep">Expat</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, Gawk, GCC, Glibc, Grep,
         Make, and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>Python and XML::Parser</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Expect dependency info -->
  <bridgehead renderas="sect2" id="expect-dep">Expect</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, Diffutils, GCC, Glibc, Grep, Make,
         Patch, Sed, and Tcl</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin File dependency info -->
  <bridgehead renderas="sect2" id="file-dep">File</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
          <seg>Bash, Binutils, Bzip2, Coreutils, Diffutils, Gawk, GCC, Glibc,
          Grep, Make, Sed, Xz, and Zlib</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Findutils dependency info -->
  <bridgehead renderas="sect2" id="findutils-dep">Findutils</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, GCC, Gettext, Glibc, Grep, Make,
         Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>DejaGNU, Diffutils, and Expect</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Flex dependency info -->
  <bridgehead renderas="sect2" id="flex-dep">Flex</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, GCC, Gettext, Glibc, Grep, M4, Make,
         Patch, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>Bison and Gawk</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>Binutils, IProute2, Kbd, Kmod, and Man-DB</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Gawk dependency info -->
  <bridgehead renderas="sect2" id="gawk-dep">Gawk</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, GCC, Gettext, Glibc, GMP, Grep, Make,
         MPFR, Patch, Readline, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>Diffutils</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>libsigsegv</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin GCC dependency info -->
  <bridgehead renderas="sect2" id="gcc-dep">GCC</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, Diffutils, Findutils, Gawk, GCC,
         Gettext, Glibc, GMP, Grep, M4, Make, MPC, MPFR, Patch, Perl, Sed, Tar,
         Texinfo, and Zstd</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>DejaGNU, Expect, and Shadow</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg><ulink url="http://gcc.gnu.org/wiki/GNAT">GNAT</ulink> and 
               <ulink url="https://repo.or.cz/isl.git">ISL</ulink> 
          </seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin GDBM dependency info -->
  <bridgehead renderas="sect2" id="gdbm">GDBM</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, Diffutils, GCC, Grep, Make, 
         and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Gettext dependency info -->
  <bridgehead renderas="sect2" id="gettext-dep">Gettext</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, Gawk, GCC, Glibc, Grep, Make,
         Ncurses, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>Diffutils, Perl, and Tcl</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>Automake and Bison</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Glibc dependency info -->
  <bridgehead renderas="sect2" id="glibc-dep">Glibc</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Bison, Coreutils, Diffutils, Gawk, GCC, Gettext,
         Grep, Gzip, Linux API Headers, Make, Perl, Python, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>File</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin GMP dependency info -->
  <bridgehead renderas="sect2" id="gmp-dep">GMP</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, Diffutils, Gawk, GCC, Glibc, Grep,
         M4, Make, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>MPFR and GCC</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Gperf dependency info -->
  <bridgehead renderas="sect2" id="gperf-dep">Gperf</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, GCC, Glibc, and Make</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>Diffutils and Expect</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Grep dependency info -->
  <bridgehead renderas="sect2" id="grep-dep">Grep</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, Diffutils, GCC, Gettext, Glibc, Grep,
         Make, Patch, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>Gawk</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>Man-DB</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>Pcre and libsigsegv</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Groff dependency info -->
  <bridgehead renderas="sect2" id="groff-dep">Groff</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Bison, Coreutils,  Gawk, GCC, Glibc, Grep, Make,
         Patch, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>Man-DB and Perl</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>Ghostscript</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin GRUB dependency info -->
  <bridgehead renderas="sect2" id="grub-dep">GRUB</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Bison, Coreutils, Diffutils, GCC, Gettext, Glibc,
         Grep, Make, Ncurses, Sed, Texinfo, and Xz</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Gzip dependency info -->
  <bridgehead renderas="sect2" id="gzip-dep">Gzip</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, GCC, Glibc, Grep, Make,
         Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>Diffutils and Less</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>Man-DB</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Iana-Etc dependency info -->
  <bridgehead renderas="sect2" id="iana-etc-dep">Iana-Etc</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Coreutils, Gawk, and Make</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>Perl</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Inetutils dependency info -->
  <bridgehead renderas="sect2" id="inetutils-dep">Inetutils</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, GCC, Glibc, Grep, Make, Ncurses,
         Patch, Sed, Texinfo, and Zlib</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>Tar</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Intltool dependency info -->
  <bridgehead renderas="sect2" id="intltool-dep">Intltool</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Gawk, Glibc, Make, Perl, Sed, and XML::Parser</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>Perl</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin IProute2 dependency info -->
  <bridgehead renderas="sect2" id="iproute2-dep">IProute2</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Bison, Coreutils, Flex, GCC, Glibc, Make, Libcap,
         Libelf, and Linux API Headers</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>Berkeley DB and Iptables</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Kbd dependency info -->
  <bridgehead renderas="sect2" id="kbd-dep">Kbd</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Bison, Check, Coreutils, Flex, GCC, Gettext,
         Glibc, Gzip, Make, Patch, and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Kmod dependency info -->
  <bridgehead renderas="sect2" id="kmod-dep">Kmod</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Bison, Coreutils, Flex, GCC, Gettext, Glibc,
         Gzip, Make, Pkg-config, Sed, Xz-Utils, and Zlib</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>Eudev</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Less dependency info -->
  <bridgehead renderas="sect2" id="less-dep">Less</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, Diffutils, GCC, Glibc, Grep, Make,
         Ncurses, and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>Gzip</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>Pcre</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Libcap dependency info -->
  <bridgehead renderas="sect2" id="libcap-dep">Libcap</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Attr, Bash, Binutils, Coreutils, GCC, Glibc, Perl, Make,
         and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>IProute2 and Shadow</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>Linux-PAM</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Libelf dependency info -->
  <bridgehead renderas="sect2" id="libelf-dep">Libelf</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, GCC, Glibc, and Make</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>IProute2 and Linux Kernel</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Libffi dependency info -->
  <bridgehead renderas="sect2" id="libffi-dep">Libffi</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, GCC, Glibc, Make, and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>DejaGnu</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>Python</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Libpipeline dependency info -->
  <bridgehead renderas="sect2" id="libpipeline-dep">Libpipeline</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, Diffutils, Gawk, GCC, Glibc, Grep,
         Make, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>Check</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>Man-DB</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Libtool dependency info -->
  <bridgehead renderas="sect2" id="libtool-dep">Libtool</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, Diffutils, Gawk, GCC, Glibc, Grep,
         Make, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>Autoconf, Automake, and Findutils</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Linux Kernel dependency info -->
  <bridgehead renderas="sect2" id="linux-dep">Linux Kernel</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Bc, Binutils, Coreutils, Diffutils, Findutils, GCC, Glibc,
         Grep, Gzip, Kmod, Libelf, Make, Ncurses, OpenSSL, Perl, and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin M4 dependency info -->
  <bridgehead renderas="sect2" id="m4-dep">M4</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, GCC, Glibc, Grep, Make, Sed, and
         Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>Diffutils</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>Autoconf and Bison</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>libsigsegv</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Make dependency info -->
  <bridgehead renderas="sect2" id="make-dep">Make</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, GCC, Gettext, Glibc, Grep,
         Make, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>Perl and Procps-ng</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Man-DB dependency info -->
  <bridgehead renderas="sect2" id="man-db-dep">Man-DB</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Bzip2, Coreutils, Flex, GCC, GDBM, Gettext,
         Glibc, Grep, Groff, Gzip, Less, Libpipeline, Make, Sed, and Xz</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>Util-linux</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Man-Pages dependency info -->
  <bridgehead renderas="sect2" id="man-pages-dep">Man-Pages</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Coreutils, and Make</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Meson dependency info -->
  <bridgehead renderas="sect2" id="meson-dep">Meson</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Ninja and Python</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>Systemd</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin MPC dependency info -->
  <bridgehead renderas="sect2" id="mpc-dep">MPC</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, Diffutils, Gawk, GCC, Glibc, Grep, GMP,
         Make, MPFR, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>GCC</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin MPFR dependency info -->
  <bridgehead renderas="sect2" id="mpfr-dep">MPFR</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, Diffutils, Gawk, GCC, Glibc, Grep, GMP,
         Make, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>Gawk and GCC</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Ncurses dependency info -->
  <bridgehead renderas="sect2" id="ncurses-dep">Ncurses</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, Diffutils, Gawk, GCC, Glibc, Grep,
         Make, Patch, and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>Bash, GRUB, Inetutils, Less, Procps-ng, Psmisc, Readline,
          Texinfo, Util-linux, and Vim</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Ninja dependency info -->
  <bridgehead renderas="sect2" id="ninja-dep">Ninja</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Binutils, Coreutils, GCC, and Python</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>Meson</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>Asciidoc, Doxygen, Emacs, and re2c</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Openssl dependency info -->
  <bridgehead renderas="sect2" id="openssl-dep">Openssl</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Binutils, Coreutils, GCC, Make, and Perl</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>Linux</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Patch dependency info -->
  <bridgehead renderas="sect2" id="patch-dep">Patch</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, GCC, Glibc, Grep, Make, and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>Diffutils</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>Ed</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Perl dependency info -->
  <bridgehead renderas="sect2" id="perl-dep">Perl</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, Gawk, GCC, GDBM, Glibc, Grep,
         Groff, Make, Sed, and Zlib</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>Iana-Etc and Procps-ng</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>Autoconf</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Pkg-config dependency info -->
  <bridgehead renderas="sect2" id="pkgconfig-dep">Pkg-config</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, Gawk, GCC, Glibc, Grep, Make,
         Popt, and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>Kmod</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Popt dependency info -->
  <bridgehead renderas="sect2" id="popt-dep">Popt</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, Gawk, GCC, Glibc, Grep, and Make</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>Diffutils and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>Pkg-config</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Procps dependency info -->
  <bridgehead renderas="sect2" id="procps-dep">Procps-ng</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, GCC, Glibc, Make, and Ncurses</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>DejaGNU</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Psmisc dependency info -->
  <bridgehead renderas="sect2" id="psmisc-dep">Psmisc</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, GCC, Gettext, Glibc, Grep, Make,
         Ncurses, and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Python dependency info -->
  <bridgehead renderas="sect2" id="python-dep">Python</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, Expat, GCC, Gdbm, Gettext, Glibc, Grep, 
         Libffi, Make, Ncurses, Sed, and Util-linux</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>GDB and Valgrind</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>Ninja</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>Berkeley DB, OpenSSL, SQLite, and Tk</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Readline dependency info -->
  <bridgehead renderas="sect2" id="readline-dep">Readline</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, Gawk, GCC, Glibc, Grep, Make, Ncurses,
         Patch, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>Bash and Gawk</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Sed dependency info -->
  <bridgehead renderas="sect2" id="sed-dep">Sed</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, GCC, Gettext, Glibc, Grep, Make,
         Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>Diffutils and Gawk</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>E2fsprogs, File, Libtool, and Shadow</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Shadow dependency info -->
  <bridgehead renderas="sect2" id="shadow-dep">Shadow</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Acl, Attr, Bash, Binutils, Coreutils, Diffutils, Findutils, Gawk, GCC,
         Gettext, Glibc, Grep, Libcap, Make, and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>Coreutils</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>Cracklib and PAM</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Sysklogd dependency info -->
  <bridgehead renderas="sect2" id="sysklogd-dep">Sysklogd</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Binutils, Coreutils, GCC, Glibc, Make, and Patch</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin systemd dependency info -->
  <bridgehead renderas="sect2" id="systemd-dep">Systemd</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Acl, Attr, Bash, Binutils, Coreutils, Diffutils, Expat, Gawk,
         GCC, Glibc, Gperf, Grep, Intltool, Libcap,
         Meson, Sed, and Util-linux</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>Many, see
            <ulink url="&blfs-root;view/systemd/general/systemd.html">BLFS
            systemd page</ulink>
          </seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Sysvinit dependency info -->
  <bridgehead renderas="sect2" id="sysvinit-dep">Sysvinit</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Binutils, Coreutils, GCC, Glibc, Make, and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Tar dependency info -->
  <bridgehead renderas="sect2" id="tar-dep">Tar</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Acl, Attr, Bash, Binutils, Bison, Coreutils, GCC, Gettext, Glibc,
         Grep, Inetutils, Make, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>Autoconf, Diffutils, Findutils, Gawk, and Gzip</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Tcl dependency info -->
  <bridgehead renderas="sect2" id="tcl-dep">Tcl</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, Diffutils, GCC, Glibc, Grep,
         Make, and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Texinfo dependency info -->
  <bridgehead renderas="sect2" id="texinfo-dep">Texinfo</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, GCC, Gettext, Glibc, Grep, Make,
         Ncurses, Patch, and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Util-linux dependency info -->
  <bridgehead renderas="sect2" id="util-linux-dep">Util-linux</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, Diffutils, Eudev, Findutils, Gawk, GCC,
         Gettext, Glibc, Grep, Make, Ncurses, Sed, and Zlib</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg><ulink url="https://people.redhat.com/sgrubb/libcap-ng/">Libcap-ng</ulink></seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Vim dependency info -->
  <bridgehead renderas="sect2" id="vim-dep">Vim</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Acl, Attr, Bash, Binutils, Coreutils, Diffutils, GCC, Glibc,
         Grep, Make, Ncurses, and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>Xorg, GTK+2, LessTif, Python, Tcl, Ruby, and GPM</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin XML::Parser dependency info -->
  <bridgehead renderas="sect2" id="xml-parser-dep">XML::Parser</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, Expat, GCC, Glibc, Make, and Perl</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>Perl</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>Intltool</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Xz-utils dependency info -->
  <bridgehead renderas="sect2" id="xz-dep">Xz</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, Diffutils, GCC, Glibc, and Make</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>Eudev, File, GRUB, Kmod, and Man-DB</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Zlib dependency info -->
  <bridgehead renderas="sect2" id="zlib-dep">Zlib</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Bash, Binutils, Coreutils, GCC, Glibc, Make, and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>File, Kmod, Perl, and Util-linux</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Zstd dependency info -->
  <bridgehead renderas="sect2" id="zstd-dep">Zstd</bridgehead>

      <segmentedlist>
        <segtitle>&dependencies;</segtitle>

        <seglistitem>
         <seg>Binutils, Coreutils, GCC, Glibc, Gzip, Make, and Xz</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&testsuites;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&before;</segtitle>

        <seglistitem>
          <seg>GCC</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist>
        <segtitle>&external;</segtitle>

        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

</appendix>