lfs-book/chapter01/changelog.xml

<sect1 id="ch01-changelog">
<title>Changelog</title>

<para>&version; - &releasedate;</para>

<itemizedlist>

<listitem><para>Updated to:

<itemizedlist>

<listitem><para>MAKEDEV-1.3</para></listitem> 
<listitem><para>autoconf-2.52</para></listitem>
<listitem><para>automake-1.5</para></listitem>
<listitem><para>binutils-2.11.2</para></listitem>
<listitem><para>e2fsprogs-1.23</para></listitem>
<listitem><para>file-3.36</para></listitem>
<listitem><para>gcc-2.95.3</para></listitem>
<listitem><para>gettext-0.10.39</para></listitem>
<listitem><para>glibc-2.2.4</para></listitem>
<listitem><para>groff-1.17.2</para></listitem>
<listitem><para>linux-2.4.8</para></listitem>
<listitem><para>man-pages-1.39</para></listitem>
<listitem><para>modutils-2.4.7</para></listitem>
<listitem><para>sysvinit-2.81</para></listitem>
<listitem><para>util-linux-2.11h</para></listitem>

</itemizedlist>

</para></listitem>

<listitem><para>August 27th 2001 [gerard]: Moved rebooting into LFS from
chapter 8 to chapter 9, after we run that find
command.</para></listitem>

<listitem><para>August 27th 2001 [gerard]: Updated the find command in
chapter 9.</para></listitem>

<listitem><para>August 27th 2001 [markh]: upgraded to e2fsprogs-1.23 and
MAKEDEV-1.3.</para></listitem>

<listitem><para>August 27th 2001 [gerard]: Added dependency lists for
all installed packages. You now can see which programs from which
packages you need in order to compile and install a
package.</para></listitem>

<listitem><para>August 27th 2001 [markh]: After a discussion on #lfs,
we've downgraded the book to linux-2.4.8 due to performance problems
with 2.4.9.</para></listitem>

<listitem><para>August 26th 2001 [markh]: Moved appendix c --&gt; appendix d and
appendix b --&gt; appendix c in order to create room for the dependency
information to go into appendix b.</para></listitem>

<listitem><para>After much testing and discussing, it's been decided to
downgrade to gcc-2.95.3 for the time being, until problems with the new
gcc-3.0 version have been fixed.</para></listitem>

<listitem><para>Chapter 5: sed commands for bzip2 and mawk static
compiles have been replaced with a simpler flag to gcc.</para></listitem>

<listitem><para>Chapter 5: A sed for fileutils-4.1 static has been added to 
avoid Segmentation Fault problems on glibc-2.2.3 systems.</para></listitem>

<listitem><para>Chapter 5: Binutils doens't require us passing -e to
make in order for LDFLAGS=-static to work properly.</para></listitem>

<listitem><para>Chapter 5: GCC isn't statically linked anymore by using
make -e LDFLAGS=-static, but by make BOOT_LDFLAGS=-static.</para></listitem>

<listitem><para>Chapter 5: Removed kernel patch for gcc-3.0 
compilation</para></listitem>

<listitem><para>Chapter 5: Added gcc-patch to fix re_max_failure 
compile problems</para></listitem>

<listitem><para>Chapter 5: Added missing chown root.root 
$LFS/usr/include/linux to kernel installation </para></listitem>

<listitem><para>Chapter 5 &amp; 6: Changed tar patch to use -j for bzip2 
files instead of -y in order to be compatible with next tar release.  Also 
renamed patch file to tar-1.13.patch</para></listitem>

<listitem><para>Chapters 5 &amp; 6: Added a new patch for gcc-2.95.3
which fixes various problems such as the weak symbol 
bug.</para></listitem>

<listitem><para>Chapter 6: Bzip2 and shadowutils static libraries 
are now put in /usr/lib instead of /lib.  There are now also links
from /usr/lib to their dynamic libraries in /lib to enable the linker to
still find the dynamic versions.</para></listitem>

<listitem><para>Chapter 6: ncurses patch totally
removed.  Static libraries now moved to /usr/lib and libcurses.a symlink
created manually.  A symlink is also created from /usr/lib to the
dynamic libraries in /lib so that the linker still sees them.</para></listitem>

<listitem><para>Chapter 6: Yacc script in bison page now uses exec bison
which replaces the shell.</para></listitem>

<listitem><para>Chapter 6: Util-linux sed command has been replaced with a 
flag to make.</para></listitem>

<listitem><para>Chapter 6: Man patch replaced with 
sed command.</para></listitem>

<listitem><para>Chapter 6: Removed shadow-utils patch in favour of a sed
command</para></listitem>

<listitem><para>Chapter 6: Removed sysvinit patch in favour of a sed
command.</para></listitem>

<listitem><para>Chapter 6: Removed the Groff command explanation 
regarding CXXFLAGS which has been made obsolete with the update 
to groff-1.17.1</para></listitem>

<listitem><para>Chapter 6: Moved the net-tools installation until after
sh-utils so that net-tools can replace sh-utils's
/bin/hostname.</para></listitem>

<listitem><para>Chapter 6: After installing Glibc, run exec /bin/bash
--login instead of exiting and re-entering the chroot'ed
environment.</para></listitem>

<listitem><para>Chapter 7: Changed $* into "$@" in the functions and rc
scripts. "$@" allows usage of quoted arguments with blanks.</para></listitem>

<listitem><para>Chapter 7: Added print_error_msg from the rcS script as
it appears in the rc script as well.</para></listitem>

</itemizedlist>

<para>3.0-pre4 - June 22nd, 2001</para>

<itemizedlist>

<listitem><para>Chapter 5: Reordered the installations 
alphabetically.</para></listitem>

<listitem><para>Chapter 6: Moved the installations of ed and 
patch into their alphabetical positions.</para></listitem>

<listitem><para>Chapter 7: Added [ ATTN ] warning message to 
the functions script. When you attemp to start a service that's 
already running or stop a service that's not running, it'll not
print FAILED anymore but [ ATTN ] along with "Already running" 
or "Not running".</para></listitem>

<listitem><para>Chapter 9: Renamed the network-scripts 
directory in nic-config.</para></listitem>

</itemizedlist>

<para>3.0-pre3 - May 12th, 2001</para>

<itemizedlist>

<listitem><para>Added numerous FHS compliance notes. These 
instructions can be followed if one wishes to build a fully 
FHS-compliant system.</para></listitem>

<listitem><para>Chapter 4: Updated the directory list to be more 
FHS compliant. Mainly this meant adding the opt directories and 
removing /usr/tmp and /usr/local/tmp</para></listitem>

<listitem><para>Chapter 5: We now copy the kernel include directories 
instead of linking to them. This is theoretically safer if we plan on 
upgrading the kernel.</para></listitem>

<listitem><para>Chapter 5+6: Removed fileutils-patch. After upgrading 
to fileutils-4.1 the patch isn't needed anymore.</para></listitem>

<listitem><para>Chapter 5+6: Put back the instructions on how to 
copy/remove the old NSS library files, in case the original distribution 
uses glibc-2.0.x.</para></listitem>

<listitem><para>Chapter 5: Added the notice about an old version 
of install-info.</para></listitem>
 
<listitem><para>Chapter 5: Removed the installation of a static 
gettext.</para></listitem>

<listitem><para>Chapter 6: Changed bin86's installation from 
"make PREFIX=/usr install" to "make INSTALL_OPTS="-m 755" 
PREFIX=/usr install". This will prevent install from invoking strip -s 
on the files. This fails because a couple of the installed files are 
shell scripts rather than programs, so they can't be stripped.</para></listitem>

<listitem><para>Chapter 6: Removed the ld.so section since we 
only used the man pages and replaced it with a patch to man-pages.</para></listitem>

<listitem><para>Chapter 7+8: Moved the creation of /etc/fstab 
to chapter 8.</para></listitem>

<listitem><para>Appendix A: Added missing descriptions of frcode, 
code and bigram in the findutils-4.1 package.</para></listitem>

</itemizedlist>

<para>3.0-pre2 - April 14th, 2001</para>

<itemizedlist>

<listitem><para>Chapter 5: Simplified ln commands.</para></listitem>
 
<listitem><para>Chapter 5: Removed prefix=$LFS/usr from tar's 
make install.</para></listitem>

<listitem><para>Chapter 5+6: Removed --disable-nls from configuration 
of programs that don't need it (bash, diffutils, gzip, sed, 
m4).</para></listitem>

<listitem><para>Chapter 5+6: Changed from "cd dir &amp;&amp; make" 
to "make -C dir" (gettext-static, sysvinit).</para></listitem>

<listitem><para>Chapter 5: Beautified the static link process 
for mawk.</para></listitem>

<listitem><para>Chapter 5: Changed the links we create during 
gcc-installation to $LFS/usr/bin/cpp.</para></listitem>

<listitem><para>Chapter 6: Changed the procps installation 
from sed'ing to an easier way.</para></listitem>

<listitem><para> Chapter 6: Changed all "rm file &amp;&amp; ln -s dest 
file" into "ln -sf file" (in glibc, bzip2 and gzip 
installations).</para></listitem>

<listitem><para>Chapter 6: Added a sed to fix a problem during 
glibc-installation.  pt_chown can not be installed setuid root, 
because "root" is not known by glibc yet (kind of hen and 
egg-problem).</para></listitem>
 
<listitem><para>Chapter 6: Changed consoledata/tools to kbd, which 
is more actively developed, and less of a pain to install.</para></listitem>

<listitem><para>Appendix A: Added the description of the Netkit-base 
and Net-tools packages.</para></listitem>

</itemizedlist>

<para>3.0-pre1 - February 27th, 2001</para>

<itemizedlist>

<listitem><para>Converted the SGML source to XML.</para></listitem>
 
<listitem><para>Chapter 4: Tell the user to use cfdisk rather than 
fdisk. The fdisk man page recommends cfdisk over fdisk because 
it's more stable.</para></listitem>
 
<listitem><para>Chapter 4: Changed the wording to make it more general 
as ext2 no longer is the only used file system. Reiser for example is 
often used too now.</para></listitem>
 
<listitem><para>Chapter 5: Added static mawk, texinfo and partially 
gettext to faciliate the move of Glibc from Chapter 5 
to Chapter 6.</para></listitem>
 
<listitem><para>Chapter 5: Added Makedev to chapter 5. We don't create 
the device files here, only copy the MAKEDEV script and make a temp 
copy which will be used to create device files. This second file 
(MAKEDEV-temp) doesn't contain user names and group names but only user 
id's and group id's. We need a few device files to get Glibc installed, 
but before GLibc is installed user and group names are not recognized yet; 
only the numeric id's. This requires a slightly modified MAKEDEV script 
which will be generated by patching the original one. This patching is done 
here in chapter 5. Also, fixed the explanations on both 
makedev installations.</para></listitem>
 
<listitem><para>Chapter 5: Recommended to install all the software 
while logged in (or su'ed to) user root.</para></listitem>
 
<listitem><para>Chapter 5+6: Added the fileutils-4.0 patch which is 
needed to compile the fileutils package on Glibc-2.2 based systems 
(such as the upcoming LFS-3.0 system).</para></listitem>

<listitem><para>Chapter 5+6: Upgraded from gcc-2.95.2 to 
gcc-2.95.2.1</para></listitem>
 
<listitem><para>Chapter 5+6: Moved Glibc from chapter 5 to 
chapter 6</para></listitem>
 
<listitem><para>Chapter 6: Changed libexecdir=/usr/bin in fileutils 
to libexecdir=/bin</para></listitem>
 
<listitem><para>Chapter 6: Updated Glibc installation instructions. 
'configparms' file creation has been deleted. No need to pick a compiler 
(either distro's native or the /usr/local/gcc2952/bin/gcc one); 
we're in chroot now so we'll use the one we have</para></listitem>
 
<listitem><para>Chapter 6: Only copy the man pages from the 
ld.so package. We don't need the ldconfig and ldd programs anymore; 
Glibc-2.2.1 comes with good working versions.</para></listitem>
 
<listitem><para>Chapter 6: Added the creation of the lex symlink 
to the flex installation.</para></listitem>
 
<listitem><para>Chapter 6: Changed $* into "$@" in the yacc script 
during bison's installation. "$@" allows usage of quoted arguments 
with blanks. </para></listitem>
 
<listitem><para>Chapter 6: Fixed the man page installation during 
console-tools' installation.</para></listitem>

<listitem><para>Chapter 6: When entering chroot the $TERM variable 
inside chroot is set properly. This is accomplished by: chroot ... 
-i HOME=/root TERM=$TERM...</para></listitem>
 
<listitem><para>Chapter 6: Merged the different sulogin lines from 
the inittab file into one line.</para></listitem>
 
<listitem><para>Chapter 7: Fixed the delays in the killproc function 
in the functions script. Now after kill, first check PIDs, then 
sleep 2 if needed. More details can be read in the comments 
in the script itself.</para></listitem>
 
<listitem><para>Chapter 7: Added the explanation how the runlevels 
and boot process works when using the LFS scripts.</para></listitem>
 
<listitem><para>Chapter 10: Added this chapter. It contains "thanks 
and good luck"notes and suggest creating the /etc/lfs-&version; 
file</para></listitem>
 
</itemizedlist>

</sect1>