Removed reiserfsprogs. Updated file and util-linux. Many miscellaneous changes.

git-svn-id: http://svn.linuxfromscratch.org/LFS/trunk/BOOK@2038 4aa44e1e-78dd-0310-a6d2-fbcd4c07a689

appendixa/appendixa.xml

@@ -44,7 +44,6 @@
 &aa-procinfo;
 &aa-procps;
 &aa-psmisc;
-&aa-reiserfs;
 &aa-sed;
 &aa-shadowpwd;
 &aa-shellutils;

appendixa/utillinux-desc.xml

@@ -5,9 +5,9 @@
 <sect3><title>Program Files</title>
 <para>agetty, arch, blockdev, cal, cfdisk, chkdupexe, col, colcrt,
 colrm, column, ctrlaltdel, cytune, ddate, dmesg, elvtune, fdformat, fdisk,
-fsck.minix, getopt, hexdump, hwclock, ipcrm, ipcs, isosize, line, logger,
-look, losetup, mcookie, mkfs, mkfs.bfs, mkfs.minix, mkswap, more, mount,
-namei, parse.bash, parse.tcsh, pivot_root, ramsize (link to rdev),
+fsck.cramfs, fsck.minix, getopt, hexdump, hwclock, ipcrm, ipcs, isosize, line, logger,
+look, losetup, mcookie, mkfs, mkfs.bfs, mkfs.cramfs, mkfs.minix, mkswap, more, mount,
+namei, parse.bash, parse.tcsh, pg, pivot_root, ramsize (link to rdev),
 raw, rdev, readprofile, rename, renice, rev, rootflags (link to rdev),
 script, setfdprm, setsid, setterm, sfdisk, swapoff (link to swapon), swapon,
 test.bash, test.tcsh, tunelp, ul, umount, vidmode (link to rdev), whereis
@@ -73,6 +73,9 @@ basis.</para></sect4>
 <sect4><title>fdisk</title>
 <para>fdisk is a disk partition table manipulator.</para></sect4>
 
+<sect4><title>fsck.cramfs</title>
+<para>No description is currently available.</para></sect4>
+
 <sect4><title>fsck.minix</title>
 <para>fsck.minix performs a consistency check for the Linux MINIX 
 filesystem.</para></sect4>
@@ -122,6 +125,9 @@ partition.</para></sect4>
 <para>mkfs.bfs creates a SCO bfs file system on a device, usually a harddisk
 partition.</para></sect4>
 
+<sect4><title>mkfs.cramfs</title>
+<para>No description is currently available.</para></sect4>
+
 <sect4><title>mkfs.minix</title>
 <para>mkfs.minix creates a Linux MINIX filesystem on a device, usually a
 harddisk partition.</para></sect4>
@@ -144,6 +150,9 @@ point).</para></sect4>
 <para>These are example scripts for using the getopt program with either
 BASH or TCSH.</para></sect4>
 
+<sect4><title>pg</title>
+<para>No description is currently available.</para></sect4>
+
 <sect4><title>pivot_root</title>
 <para>pivot_root moves the root file system of the current process.</para></sect4>
 

chapter03/creatingpart.xml

@@ -23,11 +23,11 @@ skipped.</para>
 <para>The cfdisk program (or another fdisk like program you prefer) is
 to be started with the appropriate hard disk as the option (like /dev/hda 
 if a new partition is to be created on the primary master IDE disk). It is 
-used to create a Linux Native partition, write the partition table and exit 
-the  cfdisk program. Please refer to the documentation that comes with your
-fdisk program of choice (the man pages are often a good place to start)
-and read the procedures about how to create a new Linux native
-partition and how to write the partition table.</para>
+used to create a Linux Native partition and to write the partition table.
+Please refer to the documentation that comes with your fdisk program of
+choice (the man pages are often a good place to start) and read the
+procedures about how to create a new Linux native partition and how to
+write the partition table.</para>
 
 <para>The new partition's designation should be remembered. It 
 could be something like hda11. This newly created partition will be 

chapter03/introduction.xml

@@ -2,9 +2,9 @@
 <title>Introduction</title>
 <?dbhtml filename="introduction.html" dir="chapter04"?>
 
-<para>In this chapter the partition that is going to host the LFS system is
-prepared. We will create the partition itself, make a file
-system on it, and mount it.</para>
+<para>In this chapter, the partition which will host the LFS system is
+prepared. We will create the partition itself, make a file system on it,
+and mount it.</para>
 
 </sect1>
 

chapter04/packages.xml

@@ -60,7 +60,6 @@
 &c3-procinfo;
 &c3-procps;
 &c3-psmisc;
-&c3-reiserfs;
 &c3-shadowpwd;
 &c3-sysklogd;
 &c3-sysvinit;

chapter05/diffutils-inst.xml

@@ -3,9 +3,9 @@
 
 <para>Install Diffutils by running the following commands:</para>
 
-<para><screen><userinput>CPPFLAGS=-Dre_max_failures=re_max_failures2 \
-./configure --prefix=$LFS/static --disable-nls &amp;&amp;
-make LDFLAGS=-static &amp;&amp;
+<para><screen><userinput>LDFLAGS=-static CPPFLAGS=-Dre_max_failures=re_max_failures2 \
+&nbsp;&nbsp;&nbsp;&nbsp;./configure --prefix=$LFS/static --disable-nls &amp;&amp;
+make &amp;&amp;
 make install</userinput></screen></para>
 
 </sect2>

chapter05/fileutils-inst.xml

@@ -25,8 +25,9 @@ than likely result in all kinds of compile time problems.</para>
 
 <para>Install Fileutils by running the following commands:</para>
 
-<para><screen><userinput>./configure --disable-nls --prefix=$LFS/static &amp;&amp;
-make LDFLAGS=-static &amp;&amp;
+<para><screen><userinput>LDFLAGS=-static \
+&nbsp;&nbsp;&nbsp;&nbsp;./configure --disable-nls --prefix=$LFS/static &amp;&amp;
+make &amp;&amp;
 make install</userinput></screen></para>
 
 <para>Once you have installed Fileutils, you can test whether the

chapter05/findutils-inst.xml

@@ -9,7 +9,7 @@ commands.</para>
 
 <para><screen><userinput>patch -Np1 -i ../findutils-&findutils-patch-version;.patch &amp;&amp;
 CPPFLAGS=-Dre_max_failures=re_max_failures2 \
-./configure --prefix=$LFS/static &amp;&amp;
+&nbsp;&nbsp;&nbsp;&nbsp;./configure --prefix=$LFS/static &amp;&amp;
 make LDFLAGS=-static &amp;&amp;
 make install</userinput></screen></para>
 

chapter05/gawk-inst.xml

@@ -5,7 +5,7 @@
 running the following commands:</para>
 
 <para><screen><userinput>CPPFLAGS=-Dre_max_failures=re_max_failures2 \
-./configure --prefix=$LFS/static --disable-nls &amp;&amp;
+&nbsp;&nbsp;&nbsp;&nbsp;./configure --prefix=$LFS/static --disable-nls &amp;&amp;
 make LDFLAGS=-static &amp;&amp;
 make install</userinput></screen></para>
 

chapter05/gcc-exp.xml

@@ -18,6 +18,10 @@ the --enable-languages parameter may be omitted.</para>
 <para><userinput>--enable-threads=posix:</userinput> This enables C++ 
 exception handling for multithreaded code.</para>
 
+<para><userinput>echo "#define HAVE_GAS_HIDDEN 1":</userinput>
+This defines the .hidden assembler directive so that we don't build
+a faulty Glibc later on.</para>
+
 <para><userinput>ln -s gcc $LFS/static/bin/cc:</userinput> This
 creates the $LFS/static/bin/gcc symlink which some packages need.</para>
 

chapter05/gcc-inst.xml

@@ -14,6 +14,7 @@ been warned.</para>
 cd ../gcc-build &amp;&amp;
 ../gcc-&gcc-version;/configure --prefix=/static --enable-languages=c \
 &nbsp;&nbsp;&nbsp;--disable-nls --disable-shared --enable-threads=posix &amp;&amp;
+echo "#define HAVE_GAS_HIDDEN 1" >> gcc/auto-host.h &amp;&amp;
 make BOOT_LDFLAGS=-static bootstrap &amp;&amp;
 make prefix=$LFS/static install &amp;&amp;
 ln -s gcc $LFS/static/bin/cc</userinput></screen></para>

chapter05/grep-inst.xml

@@ -3,10 +3,10 @@
 
 <para>Install Grep by running the following commands:</para>
 
-<para><screen><userinput>CPPFLAGS=-Dre_max_failures=re_max_failures2 \
-./configure --prefix=$LFS/static --disable-nls \
+<para><screen><userinput>LDFLAGS=-static CPPFLAGS=-Dre_max_failures=re_max_failures2 \
+&nbsp;&nbsp;&nbsp;&nbsp;./configure --prefix=$LFS/static --disable-nls \
 &nbsp;&nbsp;&nbsp;&nbsp;--disable-perl-regexp &amp;&amp;
-make LDFLAGS=-static &amp;&amp;
+make &amp;&amp;
 make install</userinput></screen></para>
 
 </sect2>

chapter05/patch-inst.xml

@@ -4,7 +4,7 @@
 <para>Install Patch by running the following commands:</para>
 
 <para><screen><userinput>CPPFLAGS=-D_GNU_SOURCE \
-./configure --prefix=$LFS/static &amp;&amp;
+&nbsp;&nbsp;&nbsp;&nbsp;./configure --prefix=$LFS/static &amp;&amp;
 make LDFLAGS=-static &amp;&amp;
 make install</userinput></screen></para>
 

chapter05/sed-inst.xml

@@ -4,7 +4,7 @@
 <para>Install Sed by running the following commands:</para>
 
 <para><screen><userinput>CPPFLAGS=-Dre_max_failures=re_max_failures2 \
-./configure --prefix=$LFS/static &amp;&amp;
+&nbsp;&nbsp;&nbsp;&nbsp;./configure --prefix=$LFS/static &amp;&amp;
 make LDFLAGS=-static &amp;&amp;
 make install</userinput></screen></para>
 

chapter05/texinfo-inst.xml

@@ -3,9 +3,9 @@
 
 <para>Install Texinfo by running the following commands:</para>
 
-<para><screen><userinput>./configure --prefix=$LFS/static \
+<para><screen><userinput>LDFLAGS=-static ./configure --prefix=$LFS/static \
 &nbsp;&nbsp;&nbsp;&nbsp;--disable-nls &amp;&amp;
-make LDFLAGS=-static &amp;&amp;
+make &amp;&amp;
 make install</userinput></screen></para>
 
 </sect2>

chapter05/whystatic.xml

@@ -19,7 +19,7 @@ has.</para>
 can often be around 2.5 MB), so you may not want a separate copy of each
 library attached to the program. Just imagine if you had a simple command
 like ls with an extra 2.5 MB attached to it! Instead of making the library
-an actual part of the program, or statically linked, the library is kept a
+an actual part of the program, or statically linked, the library is stored as a
 separate file, which is loaded only when the program needs it. This is what
 we call dynamically linked, as the library is loaded and unloaded dynamically,
 as the program needs it.</para>

chapter06/chapter06.xml

@@ -56,7 +56,6 @@
 &c6-procinfo;
 &c6-procps;
 &c6-psmisc;
-&c6-reiserfs;
 &c6-shadowpwd;
 &c6-sysklogd;
 &c6-sysvinit;

chapter06/glibc-exp.xml

@@ -19,6 +19,10 @@ cache. If this file doesn't exist, the installation will abort with an error
 that it can't read the file, so we simply create an empty file (the empty
 file will have Glibc default to using /lib and /usr/lib which is fine).</para>
 
+<para><userinput>--disable-profile:</userinput> This disables the building
+of libraries with profiling information. This command may be ommitted if
+you plan to do profiling.</para>
+
 <para><userinput>--enable-add-ons:</userinput> This enables the add-on that
 we install with Glibc: linuxthreads</para>
 

chapter06/glibc-inst.xml

@@ -30,7 +30,7 @@ is putting your system at very high risk.</para>
 touch /etc/ld.so.conf &amp;&amp;
 mkdir ../glibc-build &amp;&amp;
 cd ../glibc-build &amp;&amp;
-../glibc-&glibc-version;/configure --prefix=/usr \
+../glibc-&glibc-version;/configure --prefix=/usr --disable-profile \
 &nbsp;&nbsp;&nbsp;&nbsp;--enable-add-ons --libexecdir=/usr/bin &amp;&amp;
 echo "cross-compiling = no" &gt; configparms &amp;&amp;
 make &amp;&amp;

chapter06/man-inst.xml

@@ -4,10 +4,9 @@
 <para>Run the following commands to install man:</para>
 
 <para><screen><userinput>PATH=$PATH:/usr/bin:/bin \
-&nbsp;&nbsp;&nbsp;&nbsp;./configure -default &amp;&amp;
+&nbsp;&nbsp;&nbsp;&nbsp;./configure -default -confdir=/etc &&
 make &amp;&amp;
-make install &amp;&amp;
-mv /usr/share/misc/man.conf /etc</userinput></screen></para>
+make install</userinput></screen></para>
 
 <para>You may want to take a look at the man hint 
 at <ulink url="&hints-root;man.txt"/> which deals with formatting 

chapter06/patch-inst.xml

@@ -4,7 +4,7 @@
 <para>Install Patch by running the following commands:</para>
 
 <para><screen><userinput>CPPFLAGS=-D_GNU_SOURCE \
-./configure --prefix=/usr &amp;&amp;
+&nbsp;&nbsp;&nbsp;&nbsp;./configure --prefix=/usr &amp;&amp;
 make &amp;&amp;
 make install</userinput></screen></para>
 

chapter08/kernel.xml

@@ -22,6 +22,15 @@ can use your current values. If you choose to do this, first run the
 See the <filename>README</filename> file for more details when to use
 <userinput>make oldconfig</userinput>).</para>
 
+<para>If you intend to use kernel modules, you will need an
+<filename>/etc/modules.conf</filename> file. Information pertaining
+to modules and to kernel configuration in general may be found in the
+kernel documentation, which is stored stored in
+<filename>/usr/src/linux/Documentation</filename>. The modules.conf man
+page and the kernel HOWTO at
+<ulink url="http://www.tldp.org/HOWTO/Kernel-HOWTO.html"/> may also be of
+interest to you.</para>
+
 <para>The following commands are run to build the kernel:</para>
 
 <para><screen><userinput>cd /usr/src/linux &amp;&amp;</userinput>

chapter09/reboot.xml

@@ -39,6 +39,13 @@ on LFS active:</para>
 
 <para><screen><userinput>/sbin/lilo</userinput></screen></para>
 
+<para>You may now remove the static directory. If you think you may
+need to redo chapter 5, then you may wish to backup the directory before
+removing it. To remove the static directory, type the following
+command:</para>
+
+<para><screen><userinput>rm -rf /static</userinput></screen></para>
+
 <para>Now that you have finished installing your LFS system, you may
 be wondering how to install additional software, such as a web browser.
 Your first stop should be the Beyond Linux From Scratch project, which may

entities/file.ent

@@ -8,12 +8,12 @@
 <!ENTITY aa-file-dep SYSTEM "../appendixa/file-dep.xml">
 <!ENTITY aa-file-down SYSTEM "../appendixa/file-down.xml">
 
-<!ENTITY file-version "3.38">
+<!ENTITY file-version "3.39">
 <!ENTITY file-depversion "3.37">
-<!ENTITY file-contversion "3.38">
-<!ENTITY file-size "149 KB">
+<!ENTITY file-contversion "3.39">
+<!ENTITY file-size "151 KB">
 <!ENTITY file-dir "file-&file-version;">
 <!ENTITY file-package "file-&file-version;.tar.bz2">
 
-<!ENTITY file-compsize "3 MB">
+<!ENTITY file-compsize "2 MB">
 <!ENTITY file-time "1 minute">

entities/utillinux.ent

@@ -12,14 +12,14 @@
 <!ENTITY aa-utillinux-dep SYSTEM "../appendixa/utillinux-dep.xml">
 <!ENTITY aa-utillinux-down SYSTEM "../appendixa/utillinux-down.xml">
 
-<!ENTITY util-linux-version "2.11r">
+<!ENTITY util-linux-version "2.11t">
 <!ENTITY util-linux-depversion "2.11n">
-<!ENTITY util-linux-contversion "2.11r">
-<!ENTITY util-linux-size "1,041 KB">
+<!ENTITY util-linux-contversion "2.11t">
+<!ENTITY util-linux-size "1064 KB">
 <!ENTITY util-linux-dir "util-linux-&util-linux-version;">
 <!ENTITY util-linux-package "util-linux-&util-linux-version;.tar.bz2">
 
-<!ENTITY util-linux-compsize-static "12 MB">
+<!ENTITY util-linux-compsize-static "11 MB">
 <!ENTITY util-linux-time-static "1 minute">
 
 <!ENTITY util-linux-compsize "10 MB">

index.xml

@@ -4,8 +4,8 @@
 
 <!ENTITY book SYSTEM "book/book.xml">
 
-<!ENTITY version "20020708">
-<!ENTITY releasedate "July 8th, 2002">
+<!ENTITY version "200207029">
+<!ENTITY releasedate "July 29th, 2002">
 
 <!ENTITY ftp-root "ftp://ftp.linuxfromscratch.org">
 <!ENTITY http-root "http://ftp.linuxfromscratch.org">
@@ -76,7 +76,6 @@
 <!ENTITY % procinfo-entities SYSTEM "entities/procinfo.ent">
 <!ENTITY % procps-entities SYSTEM "entities/procps.ent">
 <!ENTITY % psmisc-entities SYSTEM "entities/psmisc.ent">
-<!ENTITY % reiserfs-entities SYSTEM "entities/reiserfs.ent">
 <!ENTITY % sed-entities SYSTEM "entities/sed.ent">
 <!ENTITY % shadow-entities SYSTEM "entities/shadow.ent">
 <!ENTITY % shellutils-entities SYSTEM "entities/shellutils.ent">
@@ -145,7 +144,6 @@
 %procinfo-entities;
 %procps-entities;
 %psmisc-entities;
-%reiserfs-entities;
 %sed-entities;
 %shadow-entities;
 %shellutils-entities;