Imported changes from the main book.

git-svn-id: http://svn.linuxfromscratch.org/LFS/branches/systemd@10894 4aa44e1e-78dd-0310-a6d2-fbcd4c07a689

appendices/dependencies.xml

@@ -546,7 +546,7 @@
         <segtitle>&dependencies;</segtitle>
 
         <seglistitem>
-         <seg>Bash, Binutils, Coreutils, Gawk, GCC, Glibc, Grep,
+         <seg>Bash, Binutils, Coreutils, Gawk, GCC, Glibc, Grep, Gperf,
          Make, and Sed</seg>
         </seglistitem>
       </segmentedlist>

chapter01/changelog.xml

@@ -36,6 +36,137 @@
     </listitem>
 -->
 
+    <listitem>
+      <para>2015-04-16</para>
+      <itemizedlist>
+        <listitem>
+          <para>[bdubbs] - Update to linux-4.0. Fixes
+          <ulink url="&lfs-ticket-root;3775">#3775</ulink>.</para>
+        </listitem>
+        <listitem>
+          <para>[bdubbs] - Update to tzdata-2015c. Fixes
+          <ulink url="&lfs-ticket-root;3776">#3776</ulink>.</para>
+        </listitem>
+        <listitem>
+          <para>[bdubbs] - Update to iproute2-4.0.0. Fixes
+          <ulink url="&lfs-ticket-root;3777">#3777</ulink>.</para>
+        </listitem>
+      </itemizedlist>
+    </listitem>
+
+    <listitem>
+      <para>2015-03-31</para>
+      <itemizedlist>
+        <listitem>
+          <para>[bdubbs] - Adjust discussion of LFS envronment variable to be
+          before first use.</para>
+        </listitem>
+        <listitem>
+          <para>[bdubbs] - Use --with-glibc-version=2.11 in gcc-pass1.</para>
+        </listitem>
+        <listitem>
+          <para>[bdubbs] - Update to dejagnu-1.5.3. Fixes
+          <ulink url="&lfs-ticket-root;3773">#3773</ulink>.</para>
+        </listitem>
+      </itemizedlist>
+    </listitem>
+
+    <listitem>
+      <para>2015-03-28</para>
+      <itemizedlist>
+        <listitem>
+          <para>[bdubbs] - Update to linux-3.19.3. Fixes
+          <ulink url="&lfs-ticket-root;3772">#3772</ulink>.</para>
+        </listitem>
+        <listitem>
+          <para>[bdubbs] - Update to tzdata2015b. Fixes
+          <ulink url="&lfs-ticket-root;3770">#3770</ulink>.</para>
+        </listitem>
+      </itemizedlist>
+    </listitem>
+
+    <listitem>
+      <para>2015-03-20</para>
+      <itemizedlist>
+        <listitem>
+          <para>[bdubbs] - Update to linux-3.19.2. Fixes
+          <ulink url="&lfs-ticket-root;3768">#3768</ulink>.</para>
+        </listitem>
+      </itemizedlist>
+    </listitem>
+
+    <listitem>
+      <para>2015-03-15</para>
+      <itemizedlist>
+        <listitem>
+          <para>[bdubbs] - Update to tcl-core-8.6.4. Fixes
+          <ulink url="&lfs-ticket-root;3766">#3766</ulink>.</para>
+        </listitem>
+        <listitem>
+          <para>[bdubbs] - Update to util-linux-2.26.1. Fixes
+          <ulink url="&lfs-ticket-root;3767">#3767</ulink>.</para>
+        </listitem>
+        <listitem>
+          <para>[bdubbs] - Remove non-essential static libraries
+          from the installation. Added a new section in Chapter 6 
+          Introduction, suppressed many static libraries in different
+          packages, and removed the remaining in the Cleaning Up section.
+          Fixes
+          <ulink url="&lfs-ticket-root;3751">#3751</ulink>.</para>
+        </listitem>
+      </itemizedlist>
+    </listitem>
+
+    <listitem>
+      <para>2015-03-11</para>
+      <itemizedlist>
+        <listitem>
+          <para>[bdubbs] - Update to intltool-0.51.0. Fixes
+          <ulink url="&lfs-ticket-root;3764">#3764</ulink>.</para>
+        </listitem>
+      </itemizedlist>
+    </listitem>
+
+    <listitem>
+      <para>2015-03-08</para>
+      <itemizedlist>
+        <listitem>
+          <para>[bdubbs] - Update to linux-3.19.1. Fixes
+          <ulink url="&lfs-ticket-root;3763">#3763</ulink>.</para>
+        </listitem>
+        <listitem>
+          <para>[bdubbs] - Update to patch-2.7.5. Fixes
+          <ulink url="&lfs-ticket-root;3762">#3762</ulink>.</para>
+        </listitem>
+        <listitem>
+          <para>[bdubbs] - Change tcl to minimal tcl-core package. Fixes
+          <ulink url="&lfs-ticket-root;3752">#3752</ulink>.</para>
+        </listitem>
+      </itemizedlist>
+    </listitem>
+
+    <listitem>
+      <para>2015-03-07</para>
+      <itemizedlist>
+        <listitem>
+          <para>[bdubbs] - Update to mpc-1.0.3. Fixes
+          <ulink url="&lfs-ticket-root;3753">#3753</ulink>.</para>
+        </listitem>
+        <listitem>
+          <para>[bdubbs] - Update to man-pages-3.8.1. Fixes
+          <ulink url="&lfs-ticket-root;3754">#3754</ulink>.</para>
+        </listitem>
+        <listitem>
+          <para>[bdubbs] - Update to xz-5.2.1. Fixes
+          <ulink url="&lfs-ticket-root;3757">#3757</ulink>.</para>
+        </listitem>
+        <listitem>
+          <para>[bdubbs] - Update to kmod-20. Fixes
+          <ulink url="&lfs-ticket-root;3758">#3758</ulink>.</para>
+        </listitem>
+      </itemizedlist>
+    </listitem>
+
     <listitem>
       <para>2015-03-06</para>
       <itemizedlist>

chapter01/whatsnew.xml

@@ -24,7 +24,7 @@
     <listitem><para></para></listitem>  <!-- satisfy build -->
     <!--<listitem>
     <para>None</para>
-    </listitem> -->
+    </listitem>-->
     <!--<listitem>
       <para>Acl-&acl-version;</para>
     </listitem>-->
@@ -58,14 +58,13 @@
     <!--<listitem>
       <para>D-Bus-&dbus-version;</para>
     </listitem>-->
-    <!--<listitem>
+    <listitem>
       <para>DejaGNU &dejagnu-version;</para>
-    </listitem>-->
+    </listitem>
     <!--<listitem>
       <para>Diffutils &diffutils-version;</para>
     </listitem>-->
     <!--<listitem>
-    <listitem>
       <para>E2fsprogs &e2fsprogs-version;</para>
     </listitem>-->
     <!--<listitem>
@@ -122,18 +121,18 @@
     <!--<listitem>
       <para>Inetutils &inetutils-version;</para>
     </listitem>-->
-    <!--<listitem>
+    <listitem>
       <para>Intltool-&intltool-version;</para>
-    </listitem>-->
-    <!--<listitem>
+    </listitem>
+    <listitem>
       <para>IPRoute2 &iproute2-version;</para>
-    </listitem>-->
+    </listitem>
     <!--<listitem>
       <para>Kbd &kbd-version;</para>
     </listitem>-->
-    <!--<listitem>
+    <listitem>
       <para>Kmod &kmod-version;</para>
-    </listitem>-->
+    </listitem>
     <!--<listitem>
       <para>Less &less-version;</para>
     </listitem>-->
@@ -146,9 +145,9 @@
     <!--<listitem>
       <para>Libtool &libtool-version;</para>
     </listitem>-->
-    <!--<listitem>
+    <listitem>
       <para>Linux &linux-version;</para>
-    </listitem>-->
+    </listitem>
     <!--<listitem>
       <para>M4 &m4-version;</para>
     </listitem>-->
@@ -158,21 +157,21 @@
     <!--<listitem>
       <para>Man-DB &man-db-version;</para>
     </listitem>-->
-    <!--<listitem>
+    <listitem>
       <para>Man-pages &man-pages-version;</para>
-    </listitem>-->
-    <!--<listitem>
+    </listitem>
+    <listitem>
       <para>MPC &mpc-version;</para>
-    </listitem>-->
+    </listitem>
     <!--<listitem>
       <para>MPFR &mpfr-version;</para>
     </listitem>-->
     <!--<listitem>
       <para>Ncurses &ncurses-version;</para>
     </listitem>-->
-    <!--<listitem>
+    <listitem>
       <para>Patch &patch-version;</para>
-    </listitem>-->
+    </listitem>
     <!--<listitem>
       <para>Perl &perl-version;</para>
     </listitem>-->
@@ -201,26 +200,26 @@
       <para>Tar &tar-version;</para>
     </listitem>-->
     <!--<listitem>
-      <para>TCL &tcl-version;</para>
+      <para>Tcl-core-&tcl-version;</para>
     </listitem>-->
     <!--<listitem>
       <para>Texinfo &texinfo-version;</para>
     </listitem>-->
-    <!--<listitem>
+    <listitem>
       <para>Tzdata &tzdata-version;</para>
-    </listitem>-->
-    <!--<listitem>
+    </listitem>
+    <listitem>
       <para>Util-Linux &util-linux-version;</para>
-    </listitem>-->
+    </listitem>
     <!--<listitem>
       <para>Vim &vim-version;</para>
     </listitem>-->
     <!--<listitem>
       <para>XML-Parser-&xml-parser-version;</para>
     </listitem>-->
-    <!--<listitem>
+    <listitem>
       <para>XZ-Utils &xz-version;</para>
-    </listitem>-->
+    </listitem>
     <!--<listitem>
       <para>Zlib &zlib-version;</para>
     </listitem>-->
@@ -239,6 +238,10 @@
     <title>Added:</title>
     <listitem><para></para></listitem>  <!-- satisfy build -->
 
+    <listitem>
+      <para>Tcl-core-&tcl-version;</para>
+    </listitem>
+
     <!--<listitem>
       <para>&bash-fixes-patch;</para>
     </listitem>-->
@@ -261,9 +264,9 @@
     <title>Removed:</title>
     <listitem><para></para></listitem>  <!-- satisfy build -->
 
-    <!--<listitem>
-      <para>binutils-2.24-load_gcc_lto_plugin_by_default-1.patch</para>
-    </listitem>-->
+    <listitem>
+      <para>Tcl-8.6.3</para>
+    </listitem>
 
     <!--<listitem>
       <para>binutils-2.24-lto_testsuite-1.patch</para>

chapter02/chapter02.xml

@@ -14,7 +14,7 @@
   <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="introduction.xml"/>
   <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="creatingpartition.xml"/>
   <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="creatingfilesystem.xml"/>
-  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="mounting.xml"/>
   <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="aboutlfs.xml"/>
+  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="mounting.xml"/>
 
 </chapter>

chapter02/mounting.xml

@@ -13,17 +13,11 @@
   <para>Now that a file system has been created, the partition needs to
   be made accessible. In order to do this, the partition needs to be
   mounted at a chosen mount point. For the purposes of this book, it is
-  assumed that the file system is mounted under <filename
-  class="directory">/mnt/lfs</filename>, but the directory choice is up
-  to you.</para>
+  assumed that the file system is mounted under the directory specified by the
+  <envar>LFS</envar> envronment varibale as described in the previous section.
+  </para>
 
-  <para>Choose a mount point and assign it to the <envar>LFS</envar>
-  environment variable by running:</para>
-
-<screen role="nodump"><userinput>export LFS=/mnt/lfs</userinput></screen>
-
-  <para>Next, create the mount point and mount the LFS file system by
-  running:</para>
+  <para>Create the mount point and mount the LFS file system by running:</para>
 
 <screen role="nodump"><userinput>mkdir -pv $LFS
 mount -v -t ext4 /dev/<replaceable>&lt;xxx&gt;</replaceable> $LFS</userinput></screen>

chapter05/gcc-pass1.xml

@@ -98,12 +98,14 @@ done</userinput></screen>
     copied files.  When used in conjunction with <command>cp -u</command>, this
     prevents unexpected changes to the original files in case the commands are
     inadvertently run twice.  </para>
-
+<!--
     <para>GCC doesn't detect stack protection correctly, which causes problems
     for the build of Glibc-&glibc-version;, so fix that by issuing the following
     command:</para>
 
 <screen><userinput remap="pre">sed -i '/k prot/agcc_cv_libc_provides_ssp=yes' gcc/configure</userinput></screen>
+-->
+
 <!--
     <para>Also fix a problem identified upstream:</para>
 
@@ -120,6 +122,7 @@ cd ../gcc-build</userinput></screen>
 <screen><userinput remap="configure">../gcc-&gcc-version;/configure                             \
     --target=$LFS_TGT                              \
     --prefix=/tools                                \
+    --with-glibc-version=2.11                      \
     --with-sysroot=$LFS                            \
     --with-newlib                                  \
     --without-headers                              \

chapter05/libstdc++.xml

@@ -79,8 +79,8 @@ cd ../gcc-build</userinput></screen>
       <varlistentry>
         <term><parameter>--disable-libstdcxx-threads</parameter></term>
         <listitem>
-          <para>Since we have not built the thread C library, the C++
-          one cannot be built as well.</para>
+          <para>Since we have not yet built the C threads library, the C++
+          one cannot be built either.</para>
         </listitem>
       </varlistentry>
 

chapter05/linux-headers.xml

@@ -48,8 +48,7 @@
     by way of sanitizing various C header files that are shipped in the Linux
     kernel source tarball.</para>
 
-    <para>Make sure there are no stale files and dependencies lying around
-    from previous activity:</para>
+    <para>Make sure there are no stale files embedded in the package:</para>
 
 <screen><userinput remap="pre">make mrproper</userinput></screen>
 

chapter05/tcl.xml

@@ -9,15 +9,15 @@
   <?dbhtml filename="tcl.html"?>
 
   <sect1info condition="script">
-    <productname>tcl</productname>
+    <productname>tcl-core</productname>
     <productnumber>&tcl-version;</productnumber>
     <address>&tcl-url;</address>
   </sect1info>
 
-  <title>Tcl-&tcl-version;</title>
+  <title>Tcl-core-&tcl-version;</title>
 
   <indexterm zone="ch-tools-tcl">
-    <primary sortas="a-Tcl">Tcl</primary>
+    <primary sortas="a-Tcl">Tcl-core</primary>
   </indexterm>
 
   <sect2 role="package">
@@ -38,7 +38,7 @@
   </sect2>
 
   <sect2 role="installation">
-    <title>Installation of Tcl</title>
+    <title>Installation of Tcl-core</title>
 
     <para>This package and the next three (Expect, DejaGNU, and Check) are
     installed to support running the test suites for GCC and Binutils and other
@@ -48,6 +48,10 @@
     run in this chapter (they are not mandatory), these packages are required
     to run the test suites in <xref linkend="chapter-building-system"/>.</para>
 
+    <para>Note that the Tcl package used here is a minimal version needed
+    to run the LFS tests.  For the full package, see the  
+    <ulink url='&blfs-book;general/tcl.html'>BLFS Tcl procedures</ulink>.</para>
+
     <para>Prepare Tcl for compilation:</para>
 
 <screen><userinput remap="configure">cd unix
@@ -93,7 +97,7 @@
   </sect2>
 
   <sect2 id="contents-tcl" role="content">
-    <title>Contents of Tcl</title>
+    <title>Contents of Tcl-core</title>
 
     <segmentedlist>
       <segtitle>Installed programs</segtitle>

chapter06/acl.xml

@@ -59,7 +59,9 @@
 
     <para>Prepare Acl for compilation:</para>
 
-<screen><userinput remap="configure">./configure --prefix=/usr --libexecdir=/usr/lib</userinput></screen>
+<screen><userinput remap="configure">./configure --prefix=/usr    \
+            --disable-static \
+            --libexecdir=/usr/lib</userinput></screen>
 
     <para>Compile the package:</para>
 

chapter06/attr.xml

@@ -53,7 +53,7 @@
 
     <para>Prepare Attr for compilation:</para>
 
-<screen><userinput remap="configure">./configure --prefix=/usr</userinput></screen>
+<screen><userinput remap="configure">./configure --prefix=/usr --disable-static</userinput></screen>
 
     <para>Compile the package:</para>
 

chapter06/bison.xml

@@ -39,18 +39,15 @@
 
   <sect2 role="installation">
     <title>Installation of Bison</title>
+<!-- bison only installs a static library
+    <para>Inhibit static library installation:</para>
 
+<screen><userinput remap="pre">sed -i '/lib_LIBRARIES =/d' Makefile.in</userinput></screen>    
+-->
     <para>Prepare Bison for compilation:</para>
 
 <screen><userinput remap="configure">./configure --prefix=/usr --docdir=/usr/share/doc/bison-&bison-version;</userinput></screen>
-<!--
-    <para>The configure system causes Bison to be built without support for
-    internationalization of error messages if a <command>bison</command>
-    program is not already in $PATH. The following addition will correct
-    this:</para>
 
-<screen><userinput remap="configure">echo '#define YYENABLE_NLS 1' &gt;&gt; lib/config.h</userinput></screen>
--->
     <para>Compile the package:</para>
 
 <screen><userinput remap="make">make</userinput></screen>

chapter06/dbus.xml

@@ -52,6 +52,7 @@
             --sysconfdir=/etc                   \
             --localstatedir=/var                \
             --docdir=/usr/share/doc/dbus-&dbus-version; \
+            --disable-static                    \
             --with-console-auth-dir=/run/console</userinput></screen>
 
     <variablelist>

chapter06/expat.xml

@@ -43,7 +43,7 @@
 
     <para>Prepare Expat for compilation:</para>
 
-<screen><userinput remap="configure">./configure --prefix=/usr</userinput></screen>
+<screen><userinput remap="configure">./configure --prefix=/usr --disable-static</userinput></screen>
 
     <para>Compile the package:</para>
 

chapter06/flex.xml

@@ -47,7 +47,8 @@
 
     <para>Prepare Flex for compilation:</para>
 
-<screen><userinput remap="configure">./configure --prefix=/usr --docdir=/usr/share/doc/flex-&flex-version;</userinput></screen>
+<screen><userinput remap="configure">./configure --prefix=/usr    \
+            --docdir=/usr/share/doc/flex-&flex-version;</userinput></screen>
 
     <para>Compile the package:</para>
 

chapter06/gdbm.xml

@@ -46,7 +46,9 @@
 
     <para>Prepare GDBM for compilation:</para>
 
-<screen><userinput remap="configure">./configure --prefix=/usr --enable-libgdbm-compat</userinput></screen>
+<screen><userinput remap="configure">./configure --prefix=/usr \
+            --disable-static \
+            --enable-libgdbm-compat</userinput></screen>
 
     <variablelist>
       <title>The meaning of the configure option:</title>

chapter06/gettext.xml

@@ -45,7 +45,9 @@
 
     <para>Prepare Gettext for compilation:</para>
 
-<screen><userinput remap="configure">./configure --prefix=/usr --docdir=/usr/share/doc/gettext-&gettext-version;</userinput></screen>
+<screen><userinput remap="configure">./configure --prefix=/usr    \
+            --disable-static \
+            --docdir=/usr/share/doc/gettext-&gettext-version;</userinput></screen>
 
     <para>Compile the package:</para>
 

chapter06/glibc.xml

@@ -248,10 +248,12 @@ localedef -i zh_CN -f GB18030 zh_CN.GB18030</userinput></screen>
       <primary sortas="e-/etc/localtime">/etc/localtime</primary>
     </indexterm>
 
+  <sect3>
+  <title>Adding nsswitch.conf</title>
+
     <para>The <filename>/etc/nsswitch.conf</filename> file needs to be created
-    because, although Glibc provides defaults when this file is missing or corrupt,
-    the Glibc defaults do not work well in a networked environment. The time zone
-    also needs to be configured.</para>
+    because the Glibc defaults do not work well in a networked environment.
+    </para>
 
     <para>Create a new file <filename>/etc/nsswitch.conf</filename> by running the
     following:</para>
@@ -274,7 +276,12 @@ rpc: files
 # End /etc/nsswitch.conf</literal>
 EOF</userinput></screen>
 
-    <para>Install timezone data:</para>
+    </sect3>
+
+    <sect3>
+    <title>Adding time zone data</title>
+
+    <para>Install and set up the timezone data with the following:</para>
 <screen><userinput>tar -xf ../tzdata&tzdata-version;.tar.gz
 
 ZONEINFO=/usr/share/zoneinfo
@@ -352,9 +359,9 @@ unset ZONEINFO</userinput></screen>
     <para>Replace <replaceable>&lt;xxx&gt;</replaceable> with the name of the
     time zone selected (e.g., Canada/Eastern).</para>
 
-  </sect2>
+  </sect3>
 
-  <sect2 id="conf-ld" role="configuration">
+  <sect3 id="conf-ld" role="configuration">
     <title>Configuring the Dynamic Loader</title>
 
     <indexterm zone="conf-ld">
@@ -397,6 +404,7 @@ include /etc/ld.so.conf.d/*.conf
 EOF
 mkdir -pv /etc/ld.so.conf.d</userinput></screen>
 
+  </sect3>
   </sect2>
 
   <sect2 id="contents-glibc" role="content">

chapter06/gmp.xml

@@ -52,8 +52,9 @@
 
     <para>Prepare GMP for compilation:</para>
 
-<screen><userinput remap="configure">./configure --prefix=/usr \
-            --enable-cxx  \
+<screen><userinput remap="configure">./configure --prefix=/usr    \
+            --enable-cxx     \
+            --disable-static \
             --docdir=/usr/share/doc/gmp-&gmp-version;</userinput></screen>
 
     <variablelist>

chapter06/introduction.xml

@@ -55,4 +55,29 @@
   <note><para>The SBU values and required disk space includes
   test suite data for all applicable packages in Chapter 6.</para></note>
 
+  <sect2>
+    <title>About libraries</title>
+
+    <para>In general, the LFS editors discourage building and installing static
+    libraries.  The original purpose for most static libraries has been made
+    obsolete in a modern Linux system.  In addition linking a static library
+    into a program can be detrimental.  If an update to the library is needed
+    to remove a security problem, all programs that use the static library will
+    need to be relinked to the new library.  Since the use of static libraries
+    is not always obvious, deciding which programs (and the procedures needed to
+    do the linking) may not even be known.</para>
+
+    <para>In the prcedures in Chapter 6, we remove or disable installation of
+    most static libraries.  In a few cases, especially glibc and gcc, the use
+    of static libraries remains essential to the general package building
+    process.  Usually this is done by passing a
+    <option>--disable-static</option> option to <command>configure</command>.
+    In other cases, alternate means are needed.</para>
+
+    <para>For a more complete discussion of libraries, see the discussion
+    <ulink url="&blfs-root;/view/&short-version;/introduction/libraries.html">
+    Libraries: Static or shared?</ulink> in the BLFS book.</para>
+
+  </sect2>
+
 </sect1>

chapter06/kmod.xml

@@ -74,10 +74,15 @@
 
 <screen><userinput remap="make">make</userinput></screen>
 
+    <para>This package does not come with a test suite that can be run in the
+    LFS chroot environment.  At a minimum the git program is required and
+    several tests will not run outside of a git repository. </para>
+
+<!--
     <para>To test the results, issue:</para>
 
 <screen><userinput remap="test">make check</userinput></screen>
-
+-->
     <para>Install the package, and create symlinks for
     compatibility with Module-Init-Tools (the package that previously handled
     Linux kernel modules):</para>

chapter06/libcap.xml

@@ -43,6 +43,10 @@
   <sect2 role="installation">
     <title>Installation of Libcap</title>
 
+    <para>Prevent a static library from being installed:</para>
+
+<screen><userinput remap="pre">sed -i '/install.*STALIBNAME/d' libcap/Makefile</userinput></screen>
+
     <para>Compile the package:</para>
 
 <screen><userinput remap="make">make</userinput></screen>

chapter06/mpc.xml

@@ -44,7 +44,9 @@
 
     <para>Prepare MPC for compilation:</para>
 
-<screen><userinput remap="configure">./configure --prefix=/usr --docdir=/usr/share/doc/mpc-&mpc-version;</userinput></screen>
+<screen><userinput remap="configure">./configure --prefix=/usr    \
+            --disable-static \
+            --docdir=/usr/share/doc/mpc-&mpc-version;</userinput></screen>
 
     <para>Compile the package and generate the HTML documentation:</para>
 

chapter06/mpfr.xml

@@ -49,6 +49,7 @@
     <para>Prepare MPFR for compilation:</para>
 
 <screen><userinput remap="configure">./configure --prefix=/usr        \
+            --disable-static     \
             --enable-thread-safe \
             --docdir=/usr/share/doc/mpfr-&mpfr-version;</userinput></screen>
 

chapter06/ncurses.xml

@@ -41,15 +41,9 @@
   <sect2 role="installation">
     <title>Installation of Ncurses</title>
 
-    <!-- FIXME: Uncomment if using a dated ncurses release instead of a numbered
-         one.
+    <para>Don't install a static library that is not handled by configure:</para>
 
-    <para>Since the release of Ncurses-&ncurses-version;, some bugs have been fixed
-    and features added. The most important news are .......
-    To get these fixes and features, apply the rollup patch:</para>
-
-<screen><userinput>bzcat ../&ncurses-rollup-patch; | patch -Np1</userinput></screen>
-    -->
+<screen><userinput remap="pre">sed -i '/LIBTOOL_INSTALL/d' c++/Makefile.in</userinput></screen>
 
     <para>Prepare Ncurses for compilation:</para>
 
@@ -57,6 +51,7 @@
             --mandir=/usr/share/man \
             --with-shared           \
             --without-debug         \
+            --without-normal        \
             --enable-pc-files       \
             --enable-widec</userinput></screen>
 
@@ -85,6 +80,14 @@
         </listitem>
       </varlistentry>
 
+      <varlistentry>
+        <term><parameter>--without-normal</parameter></term>
+        <listitem>
+          <para>This switch disables building and installing most static libraries.
+          </para>
+        </listitem>
+      </varlistentry>
+
     </variablelist>
 
     <para>Compile the package:</para>
@@ -119,11 +122,8 @@
 <screen><userinput remap="install">for lib in ncurses form panel menu ; do
     rm -vf                    /usr/lib/lib${lib}.so
     echo "INPUT(-l${lib}w)" &gt; /usr/lib/lib${lib}.so
-    ln -sfv lib${lib}w.a      /usr/lib/lib${lib}.a
     ln -sfv ${lib}w.pc        /usr/lib/pkgconfig/${lib}.pc
-done
-
-ln -sfv libncurses++w.a /usr/lib/libncurses++.a</userinput></screen>
+done</userinput></screen>
 
     <para>Finally, make sure that old applications that look for
     <filename class="libraryfile">-lcurses</filename> at build time are still
@@ -131,9 +131,7 @@ ln -sfv libncurses++w.a /usr/lib/libncurses++.a</userinput></screen>
 
 <screen><userinput remap="install">rm -vf                     /usr/lib/libcursesw.so
 echo "INPUT(-lncursesw)" &gt; /usr/lib/libcursesw.so
-ln -sfv libncurses.so      /usr/lib/libcurses.so
-ln -sfv libncursesw.a      /usr/lib/libcursesw.a
-ln -sfv libncurses.a       /usr/lib/libcurses.a</userinput></screen>
+ln -sfv libncurses.so      /usr/lib/libcurses.so</userinput></screen>
 
     <para>If desired, install the Ncurses documentation:</para>
 
@@ -168,14 +166,31 @@ cp -av lib/lib*.so.5* /usr/lib</userinput></screen>
       <segtitle>Installed directories</segtitle>
 
       <seglistitem>
-        <seg>captoinfo (link to tic), clear, infocmp, infotocap (link to tic),
-        ncursesw5-config, reset (link to tset), tabs, tic, toe, tput, and tset</seg>
-        <seg>libcursesw.{a,so} (symlink and linker script to libncursesw.{a,so}),
-        libformw.{a,so}, libmenuw.{a,so}, libncurses++w.a, libncursesw.{a,so},
-        libpanelw.{a,so}, and their non-wide-character counterparts without "w"
-        in the library names.</seg>
-        <seg>/usr/share/tabset, /usr/share/terminfo, and
-        /usr/share/doc/ncurses-&ncurses-version;</seg>
+        <seg>
+           captoinfo (link to tic), 
+           clear, 
+           infocmp, 
+           infotocap (link to tic),
+           ncursesw5-config, 
+           reset (link to tset), 
+           tabs, 
+           tic, 
+           toe, 
+           tput, and 
+           tset
+        </seg>
+        <seg>
+           libcursesw.so (symlink and linker script to libncursesw.so),
+           libformw.so, 
+           libmenuw.so, 
+           libncursesw.so,
+           libpanelw.so, and their non-wide-character counterparts without "w"
+              in the library names.</seg>
+        <seg>
+           /usr/share/tabset, 
+           /usr/share/terminfo, and
+           /usr/share/doc/ncurses-&ncurses-version;
+        </seg>
       </seglistitem>
     </segmentedlist>
 

chapter06/readline.xml

@@ -56,7 +56,9 @@ sed -i '/{OLDSUFF}/c:' support/shlib-install</userinput></screen>
 
     <para>Prepare Readline for compilation:</para>
 
-<screen><userinput remap="configure">./configure --prefix=/usr --docdir=/usr/share/doc/readline-&readline-version;</userinput></screen>
+<screen><userinput remap="configure">./configure --prefix=/usr    \
+            --disable-static \
+            --docdir=/usr/share/doc/readline-&readline-version;</userinput></screen>
 
     <para>Compile the package:</para>
 

chapter06/revisedchroot.xml

@@ -35,12 +35,24 @@
     instructions for this (see <ulink url="&blfs-root;"/>).</para>
   </note>
 
-<screen role="nodump"><userinput>rm -rf /tools</userinput></screen>
-
   <para>If the virtual kernel file systems have been unmounted, either manually
   or through a reboot, ensure that the virtual kernel file systems are mounted
   when reentering the chroot. This process was explained in <xref
   linkend="ch-system-bindmount"/> and <xref
   linkend="ch-system-kernfsmount"/>.</para>
 
+  <para>Finally, thre were several static libraries that were not supressed earlier
+  in the chapter in order to satisfy the regression tests in several packages. These 
+  libraries are from binutils, bzip2, e2fsprogs, <!--flex,--> libtool, and zlib.  If desired,
+  remove them now:</para>
+
+<screen><userinput>rm /usr/lib/lib{bfd,opcodes}.a
+rm /usr/lib/libbz2.a
+rm /usr/lib/lib{com_err,e2p,ext2fs,ss}.a
+<!--rm /usr/lib/lib{fl,fl_pic}.a
+-->rm /usr/lib/libltdl.a
+rm /usr/lib/libz.a</userinput></screen>
+
+<!-- Flex shared library is broken. Keep static until next flex release. -->
+
 </sect1>

chapter06/util-linux.xml

@@ -62,7 +62,7 @@
 -->
     <para>Prepare Util-linux for compilation:</para>
 
-<screen><userinput remap="configure">./configure ADJTIME_PATH=/var/lib/hwclock/adjtime   \
+<screen><userinput remap="configure">./configure ADJTIME_PATH=/var/lib/hwclock/adjtime     \
             --docdir=/usr/share/doc/util-linux-&util-linux-version; \
             --disable-chfn-chsh  \
             --disable-login      \
@@ -71,6 +71,7 @@
             --disable-setpriv    \
             --disable-runuser    \
             --disable-pylibmount \
+            --disable-static     \
             --without-python</userinput></screen>
 
     <para>The --disable and --without options prevent warnings about

chapter06/xz.xml

@@ -46,7 +46,10 @@
 
     <para>Prepare Xz for compilation with:</para>
 
-<screen><userinput remap="configure">./configure --prefix=/usr --docdir=/usr/share/doc/xz-&xz-version;</userinput></screen>
+<screen><userinput remap="configure">
+./configure --prefix=/usr    \
+            --disable-static \
+            --docdir=/usr/share/doc/xz-&xz-version;</userinput></screen>
 
     <para>Compile the package:</para>
 
@@ -75,15 +78,37 @@ ln -svf ../../lib/$(readlink /usr/lib/liblzma.so) /usr/lib/liblzma.so</userinput
       <segtitle>Installed directories</segtitle>
 
       <seglistitem>
-        <seg>lzcat (link to xz), lzcmp (link to xzdiff), lzdiff (link to
-        xzdiff), lzegrep (link to xzgrep), lzfgrep (link to xzgrep),
-        lzgrep (link to xzgrep), lzless (link to xzless), lzma (link to xz),
-        lzmadec, lzmainfo, lzmore (link to xzmore),
-        unlzma (link to xz), unxz, (link to xz), xz, xzcat (link to xz),
-        xzcmp (link to xzdiff), xzdec, xzdiff, xzegrep (link to xzgrep),
-        xzfgrep (link to xzgrep), xzgrep, xzless, and xzmore</seg>
-        <seg>liblzma.{a,so}</seg>
-        <seg>/usr/include/lzma and /usr/share/doc/xz-&xz-version;</seg>
+        <seg>
+          lzcat (link to xz), 
+          lzcmp (link to xzdiff), 
+          lzdiff (link to xzdiff), 
+          lzegrep (link to xzgrep), 
+          lzfgrep (link to xzgrep),
+          lzgrep (link to xzgrep), 
+          lzless (link to xzless), 
+          lzma (link to xz),
+          lzmadec, 
+          lzmainfo, 
+          lzmore (link to xzmore),
+          unlzma (link to xz), 
+          unxz (link to xz), 
+          xz, 
+          xzcat (link to xz),
+          xzcmp (link to xzdiff), 
+          xzdec, 
+          xzdiff, 
+          xzegrep (link to xzgrep),
+          xzfgrep (link to xzgrep), 
+          xzgrep, 
+          xzless, and 
+          xzmore</seg>
+        <seg>
+          liblzma.so
+        </seg>
+        <seg>
+          /usr/include/lzma and 
+          /usr/share/doc/xz-&xz-version;
+         </seg>
       </seglistitem>
     </segmentedlist>
 

chapter08/kernel.xml

@@ -216,10 +216,17 @@ cp -r Documentation/* /usr/share/doc/linux-&linux-version;</userinput></screen>
     on the machine. That person would then have write access to the kernel
     source.</para>
 
-    <para>If the kernel source tree is going to be retained, run
-    <command>chown -R 0:0</command> on the <filename
-    class="directory">linux-&linux-version;</filename> directory to ensure
-    all files are owned by user <emphasis>root</emphasis>.</para>
+    <note>
+      <para>In many cases, the configuration of the kernel will need to be 
+      updated for packages that will be installed later in BLFS.  Unlike
+      other packages, it is not necessary to remove the kernel source tree
+      after the newly built kernel is installed.</para>  
+    
+      <para>If the kernel source tree is going to be retained, run
+      <command>chown -R 0:0</command> on the <filename
+      class="directory">linux-&linux-version;</filename> directory to ensure
+      all files are owned by user <emphasis>root</emphasis>.</para>
+    </note>
 
     <warning>
       <para>Some kernel documentation recommends creating a symlink from

general.ent

@@ -1,8 +1,8 @@
-<!ENTITY version         "20150219-systemd">
+<!ENTITY version         "20150420-systemd">
 <!ENTITY short-version   "systemd">  <!-- Used in dbus chapter, change to x.y for release -->
-<!ENTITY releasedate     "February 19, 2015">
+<!ENTITY releasedate     "April 20, 2015">
 <!ENTITY copyrightdate   "1999-2015"><!-- jhalfs needs a literal dash, not &ndash; -->
-<!ENTITY milestone       "7.7">
+<!ENTITY milestone       "7.8">
 <!ENTITY generic-version "systemd"> <!-- Use "development", "testing", or "x.y[-pre{x}]" -->
 
 <!ENTITY lfs-root        "http://www.linuxfromscratch.org/">

packages.ent

@@ -113,10 +113,10 @@
 <!ENTITY dbus-ch6-du "43 MB">
 <!ENTITY dbus-ch6-sbu "0.4 SBU">
 
-<!ENTITY dejagnu-version "1.5.2">
-<!ENTITY dejagnu-size "583 KB">
+<!ENTITY dejagnu-version "1.5.3">
+<!ENTITY dejagnu-size "584 KB">
 <!ENTITY dejagnu-url "&gnu;dejagnu/dejagnu-&dejagnu-version;.tar.gz">
-<!ENTITY dejagnu-md5 "97a86a21c92ac456641a97f712ea40ac">
+<!ENTITY dejagnu-md5 "5bda2cdb1af51a80aecce58d6e42bd2f">
 <!ENTITY dejagnu-home "&gnu-software;dejagnu/">
 <!ENTITY dejagnu-ch5-du "4.6 MB">
 <!ENTITY dejagnu-ch5-sbu "less than 0.1 SBU">
@@ -309,18 +309,18 @@
 <!ENTITY inetutils-ch6-du "34 MB">
 <!ENTITY inetutils-ch6-sbu "0.4 SBU">
 
-<!ENTITY intltool-version "0.50.2">
-<!ENTITY intltool-size "185 KB">
+<!ENTITY intltool-version "0.51.0">
+<!ENTITY intltool-size "159 KB">
 <!ENTITY intltool-url "http://launchpad.net/intltool/trunk/&intltool-version;/+download/intltool-&intltool-version;.tar.gz">
-<!ENTITY intltool-md5 "23fbd879118253cb99aeac067da5f591">
+<!ENTITY intltool-md5 "12e517cac2b57a0121cda351570f1e63">
 <!ENTITY intltool-home "http://freedesktop.org/wiki/Software/intltool">
 <!ENTITY intltool-ch6-du "1.3 MB">
 <!ENTITY intltool-ch6-sbu "less than 0.1 SBU">
 
-<!ENTITY iproute2-version "3.19.0">
-<!ENTITY iproute2-size "445 KB">
+<!ENTITY iproute2-version "4.0.0">
+<!ENTITY iproute2-size "449 KB">
 <!ENTITY iproute2-url "&kernel;linux/utils/net/iproute2/iproute2-&iproute2-version;.tar.xz">
-<!ENTITY iproute2-md5 "237083a1e3c388cde7a115a5724dc72a">
+<!ENTITY iproute2-md5 "3adc263ade4ee76c35032e8f50b54108">
 <!ENTITY iproute2-home "&kernel;linux/utils/net/iproute2/">
 <!ENTITY iproute2-ch6-du "10.6 MB">
 <!ENTITY iproute2-ch6-sbu "0.1 SBU">
@@ -333,10 +333,10 @@
 <!ENTITY kbd-ch6-du "34 MB">
 <!ENTITY kbd-ch6-sbu "0.1 SBU">
 
-<!ENTITY kmod-version "19">
-<!ENTITY kmod-size "1,440 KB">
+<!ENTITY kmod-version "20">
+<!ENTITY kmod-size "428 KB">
 <!ENTITY kmod-url "&kernel;linux/utils/kernel/kmod/kmod-&kmod-version;.tar.xz">
-<!ENTITY kmod-md5 "a08643f814aa4efc12211c6e5909f4d9">
+<!ENTITY kmod-md5 "d6f4fef718a50bd88080de6a43bc64d8">
 <!ENTITY kmod-home " ">
 <!ENTITY kmod-ch6-du "37 MB">
 <!ENTITY kmod-ch6-sbu "0.1 SBU">
@@ -373,14 +373,14 @@
 <!ENTITY libtool-ch6-du "48 MB">
 <!ENTITY libtool-ch6-sbu "2.0 SBU">
 
-<!ENTITY linux-major-version "3">
-<!ENTITY linux-minor-version "19">
+<!ENTITY linux-major-version "4">
+<!ENTITY linux-minor-version "0">
 <!ENTITY linux-patch-version "0">
 <!--<!ENTITY linux-version "&linux-major-version;.&linux-minor-version;.&linux-patch-version;">-->
 <!ENTITY linux-version "&linux-major-version;.&linux-minor-version;">
-<!ENTITY linux-size "79,775 KB">
+<!ENTITY linux-size "80,384 KB">
 <!ENTITY linux-url "&kernel;linux/kernel/v&linux-major-version;.x/linux-&linux-version;.tar.xz">
-<!ENTITY linux-md5 "d3fc8316d4d4d04b65cbc2d70799e763">
+<!ENTITY linux-md5 "a86916bd12798220da9eb4a1eec3616d">
 <!ENTITY linux-home "http://www.kernel.org/">
 <!-- measured for 3.9.0 / gcc-4.8.0 on x86_64 : minimum is
  allnoconfig extended for a hopefully-bootable build on desktop machine,
@@ -421,18 +421,18 @@
 <!ENTITY man-db-ch6-du "33 MB">
 <!ENTITY man-db-ch6-sbu "0.4 SBU">
 
-<!ENTITY man-pages-version "3.79">
-<!ENTITY man-pages-size "1,290 KB">
+<!ENTITY man-pages-version "3.82">
+<!ENTITY man-pages-size "1,326 KB">
 <!ENTITY man-pages-url "&kernel;linux/docs/man-pages/man-pages-&man-pages-version;.tar.xz">
-<!ENTITY man-pages-md5 "938950106f4483383dd367fe9e8aab9f">
+<!ENTITY man-pages-md5 "b3d4d949530d0ce13971040b53cf7a39">
 <!ENTITY man-pages-home "http://www.kernel.org/doc/man-pages/">
 <!ENTITY man-pages-ch6-du "35 MB">
 <!ENTITY man-pages-ch6-sbu "less than 0.1 SBU">
 
-<!ENTITY mpc-version "1.0.2">
-<!ENTITY mpc-size "619 KB">
+<!ENTITY mpc-version "1.0.3">
+<!ENTITY mpc-size "655 KB">
 <!ENTITY mpc-url "http://www.multiprecision.org/mpc/download/mpc-&mpc-version;.tar.gz">
-<!ENTITY mpc-md5 "68fadff3358fb3e7976c7a398a0af4c3">
+<!ENTITY mpc-md5 "d6a1d5f8ddea3abd2cc3e98f58352d26">
 <!ENTITY mpc-home "http://www.multiprecision.org/">
 <!ENTITY mpc-ch6-du "11.2 MB">
 <!ENTITY mpc-ch6-sbu "0.3 SBU">
@@ -455,10 +455,10 @@
 <!ENTITY ncurses-ch6-du "54 MB">
 <!ENTITY ncurses-ch6-sbu "0.5 SBU">
 
-<!ENTITY patch-version "2.7.4">
-<!ENTITY patch-size "698 KB">
+<!ENTITY patch-version "2.7.5">
+<!ENTITY patch-size "711 KB">
 <!ENTITY patch-url "&gnu;patch/patch-&patch-version;.tar.xz">
-<!ENTITY patch-md5 "abc59498fcdddd44e0d07764aa105fd2">
+<!ENTITY patch-md5 "e3da7940431633fb65a01b91d3b7a27a">
 <!ENTITY patch-home "http://savannah.gnu.org/projects/patch/">
 <!ENTITY patch-ch5-du "11.3 MB">
 <!ENTITY patch-ch5-sbu "0.2 SBU">
@@ -543,11 +543,11 @@
 <!ENTITY tar-ch6-du "46 MB">
 <!ENTITY tar-ch6-sbu "2.3 SBU">
 
-<!ENTITY tcl-version "8.6.3">
+<!ENTITY tcl-version "8.6.4">
 <!ENTITY tcl-major-version "8.6">
-<!ENTITY tcl-size "8,693 KB">
-<!ENTITY tcl-url "http://downloads.sourceforge.net/project/tcl/Tcl/&tcl-version;/tcl&tcl-version;-src.tar.gz">
-<!ENTITY tcl-md5 "db382feca91754b7f93da16dc4cdad1f">
+<!ENTITY tcl-size "5,677 KB">
+<!ENTITY tcl-url "http://sourceforge.net/projects/tcl/files/Tcl/&tcl-version;/tcl-core&tcl-version;-src.tar.gz">
+<!ENTITY tcl-md5 "8b8c9d85469d8dbe32e51117b8ef11e3">
 <!ENTITY tcl-home "http://tcl.sourceforge.net/">
 <!ENTITY tcl-ch5-du "67 MB">
 <!ENTITY tcl-ch5-sbu "0.8 SBU">
@@ -562,16 +562,16 @@
 <!ENTITY texinfo-ch6-du "109 MB">
 <!ENTITY texinfo-ch6-sbu "0.5 SBU">
 
-<!ENTITY tzdata-version "2015a">
-<!ENTITY tzdata-size "286 KB">
+<!ENTITY tzdata-version "2015c">
+<!ENTITY tzdata-size "288 KB">
 <!ENTITY tzdata-url "http://www.iana.org/time-zones/repository/releases/tzdata&tzdata-version;.tar.gz">
-<!ENTITY tzdata-md5 "4ed11c894a74a5ea64201b1c6dbb8831">
+<!ENTITY tzdata-md5 "4b4a3e344786198c46909e5afde08788">
 <!ENTITY tzdata-home "http://www.iana.org/time-zones">
 
-<!ENTITY util-linux-version "2.26">
-<!ENTITY util-linux-size "3,758 KB">
+<!ENTITY util-linux-version "2.26.1">
+<!ENTITY util-linux-size "3,740 KB">
 <!ENTITY util-linux-url "&kernel;linux/utils/util-linux/v2.26/util-linux-&util-linux-version;.tar.xz">
-<!ENTITY util-linux-md5 "912c550a4e5c47c0ce9abd0733fa9a64">
+<!ENTITY util-linux-md5 "2308850946766677f3fabe0685e85de8">
 <!ENTITY util-linux-home "http://freecode.com/projects/util-linux">
 <!ENTITY util-linux-ch5-du "139 MB">
 <!ENTITY util-linux-ch5-sbu "0.6 SBU">
@@ -595,10 +595,10 @@
 <!ENTITY xml-parser-ch6-du "2.4 MB">
 <!ENTITY xml-parser-ch6-sbu "less than 0.1 SBU">
 
-<!ENTITY xz-version "5.2.0">
-<!ENTITY xz-size "984 KB">
+<!ENTITY xz-version "5.2.1">
+<!ENTITY xz-size "987 KB">
 <!ENTITY xz-url "http://tukaani.org/xz/xz-&xz-version;.tar.xz">
-<!ENTITY xz-md5 "d87c242778fcf5ce4598de80a55ded28">
+<!ENTITY xz-md5 "b5e2dd95dc8498cea5354377ed89aa65">
 <!ENTITY xz-home "http://tukaani.org/xz">
 <!ENTITY xz-ch5-du "21 MB">
 <!ENTITY xz-ch5-sbu "0.3 SBU">

prologue/hostreqs.xml

@@ -77,7 +77,7 @@
     </listitem>
 
     <listitem>
-      <para><emphasis role="strong">Glibc-2.5.1</emphasis> (Versions
+      <para><emphasis role="strong">Glibc-2.11</emphasis> (Versions
       greater than &glibc-version; are not recommended as they have
       not been tested)</para>
     </listitem>
@@ -161,7 +161,6 @@
 <screen role="nodump"><userinput>cat &gt; version-check.sh &lt;&lt; "EOF"
 <literal>#!/bin/bash
 # Simple script to list version numbers of critical development tools
-
 export LC_ALL=C
 bash --version | head -n1 | cut -d" " -f2-4
 echo "/bin/sh -&gt; `readlink -f /bin/sh`"