Remove non-essential static libraries from the installation. Added a new

section in Chapter 6 Introduction, supressed many static libraries in different
packages, and removed the remaining in the Cleaning Up section.



git-svn-id: http://svn.linuxfromscratch.org/LFS/trunk/BOOK@10880 4aa44e1e-78dd-0310-a6d2-fbcd4c07a689

chapter01/changelog.xml

@@ -36,6 +36,20 @@
     </listitem>
 -->
 
+    <listitem>
+      <para>2015-03-15</para>
+      <itemizedlist>
+        <listitem>
+          <para>[bdubbs] - Remove non-essential static libraries
+          from the installation. Added a new section in Chapter 6 
+          Introduction, suppressed many static libraries in different
+          packages, and removed the remaining in the Cleaning Up section.
+          Fixes
+          <ulink url="&lfs-ticket-root;3751">#3751</ulink>.</para>
+        </listitem>
+      </itemizedlist>
+    </listitem>
+
     <listitem>
       <para>2015-03-11</para>
       <itemizedlist>

chapter06/attr.xml

@@ -45,15 +45,12 @@
     directory:</para>
 
 <screen><userinput remap="pre">sed -i -e 's|/@pkg_name@|&amp;-@pkg_version@|' include/builddefs.in</userinput></screen>
-<!--
-    <para>Prevent installation of manual pages that were already installed by
-    Man-Pages package:</para>
 
-<screen><userinput remap="pre">sed -i -e "/SUBDIRS/s|man2||" man/Makefile</userinput></screen>
--->
     <para>Prepare Attr for compilation:</para>
 
-<screen><userinput remap="configure">./configure --prefix=/usr --bindir=/bin</userinput></screen>
+<screen><userinput remap="configure">./configure --prefix=/usr \
+            --bindir=/bin \
+            --disable-static</userinput></screen>
 
     <para>Compile the package:</para>
 

chapter06/bison.xml

@@ -40,17 +40,14 @@
   <sect2 role="installation">
     <title>Installation of Bison</title>
 
+    <para>Inhibit static library installation:</para>
+
+<screen><userinput remap="pre">sed -i '/lib_LIBRARIES =/d' Makefile.in</userinput></screen>    
+
     <para>Prepare Bison for compilation:</para>
 
 <screen><userinput remap="configure">./configure --prefix=/usr --docdir=/usr/share/doc/bison-&bison-version;</userinput></screen>
-<!--
-    <para>The configure system causes Bison to be built without support for
-    internationalization of error messages if a <command>bison</command>
-    program is not already in $PATH. The following addition will correct
-    this:</para>
-
-<screen><userinput remap="configure">echo '#define YYENABLE_NLS 1' &gt;&gt; lib/config.h</userinput></screen>
--->
+
     <para>Compile the package:</para>
 
 <screen><userinput remap="make">make</userinput></screen>

chapter06/eudev.xml

@@ -62,6 +62,7 @@ BLKID_LIBS='-L/tools/lib -lblkid'   \
             --enable-keymap         \
             --disable-introspection \
             --disable-gudev         \
+            --disable-static        \
             --disable-gtk-doc-html</userinput></screen>
 
 <para>Compile the package:</para>

chapter06/expat.xml

@@ -43,7 +43,7 @@
 
     <para>Prepare Expat for compilation:</para>
 
-<screen><userinput remap="configure">./configure --prefix=/usr</userinput></screen>
+<screen><userinput remap="configure">./configure --prefix=/usr --disable-static</userinput></screen>
 
     <para>Compile the package:</para>
 

chapter06/flex.xml

@@ -47,7 +47,8 @@
 
     <para>Prepare Flex for compilation:</para>
 
-<screen><userinput remap="configure">./configure --prefix=/usr --docdir=/usr/share/doc/flex-&flex-version;</userinput></screen>
+<screen><userinput remap="configure">./configure --prefix=/usr    \
+            --docdir=/usr/share/doc/flex-&flex-version;</userinput></screen>
 
     <para>Compile the package:</para>
 

chapter06/gdbm.xml

@@ -46,7 +46,9 @@
 
     <para>Prepare GDBM for compilation:</para>
 
-<screen><userinput remap="configure">./configure --prefix=/usr --enable-libgdbm-compat</userinput></screen>
+<screen><userinput remap="configure">./configure --prefix=/usr \
+            --disable-static \
+            --enable-libgdbm-compat</userinput></screen>
 
     <variablelist>
       <title>The meaning of the configure option:</title>

chapter06/gettext.xml

@@ -45,7 +45,9 @@
 
     <para>Prepare Gettext for compilation:</para>
 
-<screen><userinput remap="configure">./configure --prefix=/usr --docdir=/usr/share/doc/gettext-&gettext-version;</userinput></screen>
+<screen><userinput remap="configure">./configure --prefix=/usr    \
+            --disable-static \
+            --docdir=/usr/share/doc/gettext-&gettext-version;</userinput></screen>
 
     <para>Compile the package:</para>
 

chapter06/gmp.xml

@@ -52,8 +52,9 @@
 
     <para>Prepare GMP for compilation:</para>
 
-<screen><userinput remap="configure">./configure --prefix=/usr \
-            --enable-cxx  \
+<screen><userinput remap="configure">./configure --prefix=/usr    \
+            --enable-cxx     \
+            --disable-static \
             --docdir=/usr/share/doc/gmp-&gmp-version;</userinput></screen>
 
     <variablelist>

chapter06/introduction.xml

@@ -55,4 +55,29 @@
   <note><para>The SBU values and required disk space includes
   test suite data for all applicable packages in Chapter 6.</para></note>
 
+  <sect2>
+    <title>About libraries</title>
+
+    <para>In general, the LFS editors discourage building and installing static
+    libraries.  The original purpose for most static libraries has been made
+    obsolete in a modern Linux system.  In addition linking a static library
+    into a program can be detrimental.  If an update to the library is needed
+    to remove a security problem, all programs that use the static library will
+    need to be relinked to the new library.  Since the use of static libraries
+    is not always obvious, deciding which programs (and the procedures needed to
+    do the linking) may not even be known.</para>
+
+    <para>In the prcedures in Chapter 6, we remove or disable installation of
+    most static libraries.  In a few cases, especially glibc and gcc, the use
+    of static libraries remains essential to the general package building
+    process.  Usually this is done by passing a
+    <option>--disable-static</option> option to <command>configure</command>.
+    In other cases, alternate means are needed.</para>
+
+    <para>For a more complete discussion of libraries, see the discussion
+    <ulink url="&blfs-root;/view/&short-version;/introduction/libraries.html">
+    Libraries: Static or shared?</ulink> in the BLFS book.</para>
+
+  </sect2>
+
 </sect1>

chapter06/libcap.xml

@@ -43,6 +43,10 @@
   <sect2 role="installation">
     <title>Installation of Libcap</title>
 
+    <para>Prevent a static library from being installed:</para>
+
+<screen><userinput remap="pre">sed -i '/install.*STALIBNAME/d' libcap/Makefile</userinput></screen>
+
     <para>Compile the package:</para>
 
 <screen><userinput remap="make">make</userinput></screen>

chapter06/mpc.xml

@@ -44,7 +44,9 @@
 
     <para>Prepare MPC for compilation:</para>
 
-<screen><userinput remap="configure">./configure --prefix=/usr --docdir=/usr/share/doc/mpc-&mpc-version;</userinput></screen>
+<screen><userinput remap="configure">./configure --prefix=/usr    \
+            --disable-static \
+            --docdir=/usr/share/doc/mpc-&mpc-version;</userinput></screen>
 
     <para>Compile the package and generate the HTML documentation:</para>
 

chapter06/mpfr.xml

@@ -49,6 +49,7 @@
     <para>Prepare MPFR for compilation:</para>
 
 <screen><userinput remap="configure">./configure --prefix=/usr        \
+            --disable-static     \
             --enable-thread-safe \
             --docdir=/usr/share/doc/mpfr-&mpfr-version;</userinput></screen>
 

chapter06/ncurses.xml

@@ -41,15 +41,9 @@
   <sect2 role="installation">
     <title>Installation of Ncurses</title>
 
-    <!-- FIXME: Uncomment if using a dated ncurses release instead of a numbered
-         one.
+    <para>Don't install a static library that is not handled by configure:</para>
 
-    <para>Since the release of Ncurses-&ncurses-version;, some bugs have been fixed
-    and features added. The most important news are .......
-    To get these fixes and features, apply the rollup patch:</para>
-
-<screen><userinput>bzcat ../&ncurses-rollup-patch; | patch -Np1</userinput></screen>
-    -->
+<screen><userinput remap="pre">sed -i '/LIBTOOL_INSTALL/d' c++/Makefile.in</userinput></screen>
 
     <para>Prepare Ncurses for compilation:</para>
 
@@ -57,6 +51,7 @@
             --mandir=/usr/share/man \
             --with-shared           \
             --without-debug         \
+            --without-normal        \
             --enable-pc-files       \
             --enable-widec</userinput></screen>
 
@@ -85,6 +80,14 @@
         </listitem>
       </varlistentry>
 
+      <varlistentry>
+        <term><parameter>--without-normal</parameter></term>
+        <listitem>
+          <para>This switch disables building and installing most static libraries.
+          </para>
+        </listitem>
+      </varlistentry>
+
     </variablelist>
 
     <para>Compile the package:</para>
@@ -119,11 +122,8 @@
 <screen><userinput remap="install">for lib in ncurses form panel menu ; do
     rm -vf                    /usr/lib/lib${lib}.so
     echo "INPUT(-l${lib}w)" &gt; /usr/lib/lib${lib}.so
-    ln -sfv lib${lib}w.a      /usr/lib/lib${lib}.a
     ln -sfv ${lib}w.pc        /usr/lib/pkgconfig/${lib}.pc
-done
-
-ln -sfv libncurses++w.a /usr/lib/libncurses++.a</userinput></screen>
+done</userinput></screen>
 
     <para>Finally, make sure that old applications that look for
     <filename class="libraryfile">-lcurses</filename> at build time are still
@@ -131,9 +131,7 @@ ln -sfv libncurses++w.a /usr/lib/libncurses++.a</userinput></screen>
 
 <screen><userinput remap="install">rm -vf                     /usr/lib/libcursesw.so
 echo "INPUT(-lncursesw)" &gt; /usr/lib/libcursesw.so
-ln -sfv libncurses.so      /usr/lib/libcurses.so
-ln -sfv libncursesw.a      /usr/lib/libcursesw.a
-ln -sfv libncurses.a       /usr/lib/libcurses.a</userinput></screen>
+ln -sfv libncurses.so      /usr/lib/libcurses.so</userinput></screen>
 
     <para>If desired, install the Ncurses documentation:</para>
 
@@ -168,14 +166,31 @@ cp -av lib/lib*.so.5* /usr/lib</userinput></screen>
       <segtitle>Installed directories</segtitle>
 
       <seglistitem>
-        <seg>captoinfo (link to tic), clear, infocmp, infotocap (link to tic),
-        ncursesw5-config, reset (link to tset), tabs, tic, toe, tput, and tset</seg>
-        <seg>libcursesw.{a,so} (symlink and linker script to libncursesw.{a,so}),
-        libformw.{a,so}, libmenuw.{a,so}, libncurses++w.a, libncursesw.{a,so},
-        libpanelw.{a,so}, and their non-wide-character counterparts without "w"
-        in the library names.</seg>
-        <seg>/usr/share/tabset, /usr/share/terminfo, and
-        /usr/share/doc/ncurses-&ncurses-version;</seg>
+        <seg>
+           captoinfo (link to tic), 
+           clear, 
+           infocmp, 
+           infotocap (link to tic),
+           ncursesw5-config, 
+           reset (link to tset), 
+           tabs, 
+           tic, 
+           toe, 
+           tput, and 
+           tset
+        </seg>
+        <seg>
+           libcursesw.so (symlink and linker script to libncursesw.so),
+           libformw.so, 
+           libmenuw.so, 
+           libncursesw.so,
+           libpanelw.so, and their non-wide-character counterparts without "w"
+              in the library names.</seg>
+        <seg>
+           /usr/share/tabset, 
+           /usr/share/terminfo, and
+           /usr/share/doc/ncurses-&ncurses-version;
+        </seg>
       </seglistitem>
     </segmentedlist>
 

chapter06/readline.xml

@@ -56,7 +56,9 @@ sed -i '/{OLDSUFF}/c:' support/shlib-install</userinput></screen>
 
     <para>Prepare Readline for compilation:</para>
 
-<screen><userinput remap="configure">./configure --prefix=/usr --docdir=/usr/share/doc/readline-&readline-version;</userinput></screen>
+<screen><userinput remap="configure">./configure --prefix=/usr    \
+            --disable-static \
+            --docdir=/usr/share/doc/readline-&readline-version;</userinput></screen>
 
     <para>Compile the package:</para>
 

chapter06/revisedchroot.xml

@@ -35,12 +35,22 @@
     instructions for this (see <ulink url="&blfs-root;"/>).</para>
   </note>
 
-<screen role="nodump"><userinput>rm -rf /tools</userinput></screen>
-
   <para>If the virtual kernel file systems have been unmounted, either manually
   or through a reboot, ensure that the virtual kernel file systems are mounted
   when reentering the chroot. This process was explained in <xref
   linkend="ch-system-bindmount"/> and <xref
   linkend="ch-system-kernfsmount"/>.</para>
 
+  <para>Finally, thre were several static libraries that were not supressed earlier
+  in the chapter in order to satisfy the regression tests in several packages. These 
+  libraries are from binutils, bzip2, e2fsprogs, flex, libtool, and zlib.  If desired,
+  remove them now:</para>
+
+<screen><userinput>rm /usr/lib/lib{bfd,opcodes}.a
+rm /usr/lib/libbz2.a
+rm /usr/lib/lib{com_err,e2p,ext2fs,ss}.a
+rm /usr/lib/lib{fl,fl_pic}.a
+rm /usr/lib/libltdl.a
+rm /usr/lib/libz.a</userinput></screen>
+
 </sect1>

chapter06/util-linux.xml

@@ -71,6 +71,7 @@
             --disable-setpriv    \
             --disable-runuser    \
             --disable-pylibmount \
+            --disable-static     \
             --without-python     \
             --without-systemd    \
             --without-systemdsystemunitdir</userinput></screen>

chapter06/xz.xml

@@ -46,7 +46,10 @@
 
     <para>Prepare Xz for compilation with:</para>
 
-<screen><userinput remap="configure">./configure --prefix=/usr --docdir=/usr/share/doc/xz-&xz-version;</userinput></screen>
+<screen><userinput remap="configure">
+./configure --prefix=/usr    \
+            --disable-static \
+            --docdir=/usr/share/doc/xz-&xz-version;</userinput></screen>
 
     <para>Compile the package:</para>
 
@@ -75,15 +78,37 @@ ln -svf ../../lib/$(readlink /usr/lib/liblzma.so) /usr/lib/liblzma.so</userinput
       <segtitle>Installed directories</segtitle>
 
       <seglistitem>
-        <seg>lzcat (link to xz), lzcmp (link to xzdiff), lzdiff (link to
-        xzdiff), lzegrep (link to xzgrep), lzfgrep (link to xzgrep),
-        lzgrep (link to xzgrep), lzless (link to xzless), lzma (link to xz),
-        lzmadec, lzmainfo, lzmore (link to xzmore),
-        unlzma (link to xz), unxz, (link to xz), xz, xzcat (link to xz),
-        xzcmp (link to xzdiff), xzdec, xzdiff, xzegrep (link to xzgrep),
-        xzfgrep (link to xzgrep), xzgrep, xzless, and xzmore</seg>
-        <seg>liblzma.{a,so}</seg>
-        <seg>/usr/include/lzma and /usr/share/doc/xz-&xz-version;</seg>
+        <seg>
+          lzcat (link to xz), 
+          lzcmp (link to xzdiff), 
+          lzdiff (link to xzdiff), 
+          lzegrep (link to xzgrep), 
+          lzfgrep (link to xzgrep),
+          lzgrep (link to xzgrep), 
+          lzless (link to xzless), 
+          lzma (link to xz),
+          lzmadec, 
+          lzmainfo, 
+          lzmore (link to xzmore),
+          unlzma (link to xz), 
+          unxz (link to xz), 
+          xz, 
+          xzcat (link to xz),
+          xzcmp (link to xzdiff), 
+          xzdec, 
+          xzdiff, 
+          xzegrep (link to xzgrep),
+          xzfgrep (link to xzgrep), 
+          xzgrep, 
+          xzless, and 
+          xzmore</seg>
+        <seg>
+          liblzma.so
+        </seg>
+        <seg>
+          /usr/include/lzma and 
+          /usr/share/doc/xz-&xz-version;
+         </seg>
       </seglistitem>
     </segmentedlist>
 

general.ent

@@ -1,7 +1,7 @@
-<!ENTITY version         "SVN-20150311">
+<!ENTITY version         "SVN-20150315">
 <!ENTITY short-version   "svn">  <!-- Used below in &blfs-book;. Change to x.y for release 
                                       but not -rc releases -->
-<!ENTITY releasedate     "March 11, 2015">
+<!ENTITY releasedate     "March 15, 2015">
 <!ENTITY copyrightdate   "1999-2015"><!-- jhalfs needs a literal dash, not &ndash; -->
 <!ENTITY milestone       "7.8">
 <!ENTITY generic-version "development"> <!-- Use "development", "testing", or "x.y[-pre{x}]" -->

prologue/bookinfo.xml

@@ -16,8 +16,8 @@
       <surname>Beekmans</surname>
     </author>
     <author>
-      <firstname>Edited by Matthew Burgess</firstname>
-      <surname>and Bruce Dubbs</surname>
+      <firstname>Managing Editor is Bruce</firstname>
+      <surname>Dubbs</surname>
     </author>
   </authorgroup>