lfs-book-i18n/zh_CN/chapter11/reboot.po

msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"POT-Creation-Date: 2020-08-08 19:28+0800\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Translate Toolkit 2.2.5\n"

#. type: Content of: <sect1><title>
msgid "Rebooting the System"
msgstr "重启系统"

#. type: Content of: <sect1><para>
msgid ""
"Now that all of the software has been installed, it is time to reboot your "
"computer. However, you should be aware of a few things. The system you have "
"created in this book is quite minimal, and most likely will not have the "
"functionality you would need to be able to continue forward. By installing a "
"few extra packages from the BLFS book while still in our current chroot "
"environment, you can leave yourself in a much better position to continue on "
"once you reboot into your new LFS installation. Here are some suggestions:"
msgstr ""
"现在已经安装好了本书中的所有软件，可以重新启动进入 LFS 了。然而，您应该注意一"
"些可能出现的问题。您根据本书构建的系统是很小的，可能缺失一些功能，导致您无法"
"继续使用。您可以在当前的 chroot 环境中安装一些 BLFS 手册提供的额外软件包，以"
"便在重启进入新的 LFS 系统后更容易工作。下面是一些建议您考虑的软件包："

#. type: Content of: <sect1><itemizedlist><listitem><para>
msgid ""
"A text mode browser such as <ulink url='&blfs-book;basicnet/lynx.html'>Lynx</"
"ulink> will allow you to easily view the BLFS book in one virtual terminal, "
"while building packages in another."
msgstr ""
"字符模式浏览器，例如 <ulink url='&blfs-book;basicnet/lynx.html'>Lynx</"
"ulink>，这样您可以在一个虚拟终端中阅读 BLFS 手册，同时在另一个虚拟终端构建软"
"件包。"

#. type: Content of: <sect1><itemizedlist><listitem><para>
msgid ""
"The <ulink url='&blfs-book;general/gpm.html'>GPM</ulink> package will allow "
"you to perform copy/paste actions in your virtual terminals."
msgstr ""
"<ulink url='&blfs-book;general/gpm.html'>GPM</ulink> 软件包允许您在 虚拟终端"
"中进行复制粘贴操作。"

#. type: Content of: <sect1><itemizedlist><listitem><para>
msgid ""
"If you are in a situation where static IP configuration does not meet your "
"networking requirements, installing a package such as <ulink url='&blfs-book;"
"basicnet/dhcpcd.html'>dhcpcd</ulink> or the client portion of <ulink "
"url='&blfs-book;basicnet/dhcp.html'>dhcp</ulink> may be useful."
msgstr ""
"如果静态 IP 配置不符合您的网络环境要求，安装 <ulink url='&blfs-book;basicnet/"
"dhcpcd.html'>dhcpcd</ulink> 或 <ulink url='&blfs-book;basicnet/dhcp."
"html'>dhcp</ulink> 的客户端部分等在这种环境下有用的软件包。"

#. type: Content of: <sect1><itemizedlist><listitem><para>
msgid ""
"Installing <ulink url='&blfs-book;postlfs/sudo.html'>sudo</ulink> may be "
"useful for building packages as a non-root user and easily installing the "
"resulting packages in your new system."
msgstr ""
"可以安装 <ulink url='&blfs-book;postlfs/sudo.html'>sudo</ulink>，这样就能使用"
"非 root 用户构建软件包，再很容易地切换到 root 身份进行安装。"

#. type: Content of: <sect1><itemizedlist><listitem><para>
msgid ""
"If you want to access your new system from a remote system within a "
"comfortable GUI environment, install <ulink url='&blfs-book;postlfs/openssh."
"html'>openssh</ulink>."
msgstr ""
"如果您想从具有舒适的 GUI 环境的远程计算机访问新系统，安装 <ulink url='&blfs-"
"book;postlfs/openssh.html'>openssh</ulink>。"

#. type: Content of: <sect1><itemizedlist><listitem><para>
msgid ""
"To make fetching files over the internet easier, install <ulink url='&blfs-"
"book;basicnet/wget.html'>wget</ulink>."
msgstr ""
"为了更方便地从网络下载文件，安装 <ulink url='&blfs-book;basicnet/wget."
"html'>wget</ulink>。"

#. type: Content of: <sect1><itemizedlist><listitem><para>
msgid ""
"If one or more of your disk drives have a GUID partition table (GPT), either "
"<ulink url='&blfs-book;postlfs/gptfdisk.html'>gptfdisk</ulink> or <ulink "
"url='&blfs-book;postlfs/parted.html'>parted</ulink> will be useful."
msgstr ""
"如果您有 GUID 分区表 (GPT) 磁盘，可能需要安装 <ulink url='&blfs-book;postlfs/"
"gptfdisk.html'>gptfdisk</ulink> 或 <ulink url='&blfs-book;postlfs/parted."
"html'>parted</ulink>。"

#. type: Content of: <sect1><itemizedlist><listitem><para>
msgid ""
"Finally, a review of the following configuration files is also appropriate "
"at this point."
msgstr "最后，可以再次检查下列配置文件。"

#. type: Content of: <sect1><itemizedlist><listitem><itemizedlist><listitem><para>
msgid "/etc/bashrc"
msgstr "/etc/bashrc"

#. type: Content of: <sect1><itemizedlist><listitem><itemizedlist><listitem><para>
msgid "/etc/dircolors"
msgstr "/etc/dircolors"

#. type: Content of: <sect1><itemizedlist><listitem><itemizedlist><listitem><para>
msgid "/etc/fstab"
msgstr "/etc/fstab"

#. type: Content of: <sect1><itemizedlist><listitem><itemizedlist><listitem><para>
msgid "/etc/hosts"
msgstr "/etc/hosts"

#. type: Content of: <sect1><itemizedlist><listitem><itemizedlist><listitem><para>
msgid "/etc/inputrc"
msgstr "/etc/inputrc"

#. type: Content of: <sect1><itemizedlist><listitem><itemizedlist><listitem><para>
msgid "/etc/profile"
msgstr "/etc/profile"

#. type: Content of: <sect1><itemizedlist><listitem><itemizedlist><listitem><para>
msgid "/etc/resolv.conf"
msgstr "/etc/resolv.conf"

#. type: Content of: <sect1><itemizedlist><listitem><itemizedlist><listitem><para>
msgid "/etc/vimrc"
msgstr "/etc/vimrc"

#. type: Content of: <sect1><itemizedlist><listitem><itemizedlist><listitem><para>
msgid "/root/.bash_profile"
msgstr "/root/.bash_profile"

#. type: Content of: <sect1><itemizedlist><listitem><itemizedlist><listitem><para>
msgid "/root/.bashrc"
msgstr "/root/.bashrc"

#. type: Content of: <sect1><itemizedlist><listitem><itemizedlist><listitem><para>
msgid "/etc/sysconfig/ifconfig.eth0"
msgstr "/etc/sysconfig/ifconfig.eth0"

#. type: Content of: <sect1><para>
msgid ""
"Now that we have said that, let's move on to booting our shiny new LFS "
"installation for the first time! First exit from the chroot environment:"
msgstr ""
"现在，正如我们之前保证的，您可以引导全新的 LFS 系统了！首先退出 chroot 环境："

#. type: Content of: <sect1><screen>
#, no-wrap
msgid "<userinput>logout</userinput>"
msgstr "<userinput>logout</userinput>"

#. type: Content of: <sect1><para>
msgid "Then unmount the virtual file systems:"
msgstr "解除虚拟文件系统的挂载："

#. type: Content of: <sect1><screen>
#, no-wrap
msgid ""
"<userinput>umount -v $LFS/dev/pts\n"
"umount -v $LFS/dev\n"
"umount -v $LFS/run\n"
"umount -v $LFS/proc\n"
"umount -v $LFS/sys</userinput>"
msgstr ""
"<userinput>umount -v $LFS/dev/pts\n"
"umount -v $LFS/dev\n"
"umount -v $LFS/run\n"
"umount -v $LFS/proc\n"
"umount -v $LFS/sys</userinput>"

#. type: Content of: <sect1><para>
msgid ""
"If multiple partitions were created, unmount the other partitions before "
"unmounting the main one, like this:"
msgstr ""
"如果为 LFS 创建了多个分区，在解除 LFS 文件系统的挂载前，先解除其他挂载点："

#. type: Content of: <sect1><screen>
#, no-wrap
msgid ""
"<userinput>umount -v $LFS/usr\n"
"umount -v $LFS/home\n"
"umount -v $LFS</userinput>"
msgstr ""
"<userinput>umount -v $LFS/usr\n"
"umount -v $LFS/home\n"
"umount -v $LFS</userinput>"

#. type: Content of: <sect1><para>
msgid "Unmount the LFS file system itself:"
msgstr "解除 LFS 文件系统本身的挂载："

#. type: Content of: <sect1><screen>
#, no-wrap
msgid "<userinput>umount -v $LFS</userinput>"
msgstr "<userinput>umount -v $LFS</userinput>"

#. type: Content of: <sect1><para>
msgid "Now, reboot the system with:"
msgstr "现在重新启动系统："

#. type: Content of: <sect1><screen>
#, no-wrap
msgid "<userinput>shutdown -r now</userinput>"
msgstr "<userinput>shutdown -r now</userinput>"

#. type: Content of: <sect1><para>
msgid ""
"Assuming the GRUB boot loader was set up as outlined earlier, the menu is "
"set to boot <emphasis>LFS &version;</emphasis> automatically."
msgstr ""
"如果 GRUB 引导加载器如同本书前文所述安装，并配置正确，GRUB 目录应该已经配置为"
"自动引导 <emphasis>LFS &version;</emphasis> 启动项。"

#. type: Content of: <sect1><para>
msgid ""
"When the reboot is complete, the LFS system is ready for use and more "
"software may be added to suit your needs."
msgstr ""
"重启完成后，LFS 系统就可以使用了，您可以安装更多软件包以满足自己的需求。"